Routers/Gateways
PBX Dependent Feature! 
Note : Multiple gateways are supported in IPFX 4.3.
From this folder the IPFX Administrator can set up a router/gateway (a router/gateway provides gateway functionality between the Public Telephony Network (PSTN) and the IP Telephony Network). This also provides other Network functions.
To enter a router/gateway
- Open the Devices>Routers>Gateways subfolder and right- click on the right side of your screen to display the shortcut menu.
- Click on New Gateway... to display the Router Details Screen.
- Enter the Router/Gateway Name - this is a text description and is not critical to the Router detail.
- Enter the Description - this is a text description and is not critical to the Router detail.
- Enter the IP Address (data) of the Router/Gateway.
Important! It is critical you enter the correct IP Address in this field
- Select the Region from the drop-down menu. Each gateway is associated with a region. Extensions within a region use this gateway by default.
- Enter the Port number (default is 5060).
System Tools
The Backup and Restore buttons in the System Tools area of the Router/Gateway window are used to perform backup procedures on the Router/Gateway. These buttons are disabled if a username and password are not supplied in the Setup Wizard screen.
Telnet is used to connect directly to the router.
The Setup Wizard button allows you enter information to configure the Router.
Note: If you Restore or Reset a Router/Gateway, all specialized configuration that is not part of the original template will be eliminated. Please ensure any additional changes that are part of the Router/Gateway setup are put in place manually.