[Serial]

EPMA Xtreme Probe

[Serial]

Port=1

HandShaking=1

Baud=9600

Parity="N"

DataBits=8

StopBits=1

 

These serial port parameters are obsolete and no longer utilized.

 

Port=1

The serial communication port used for hardware interfacing to the microprobe hardware. Allowable serial communication port values are 1 - 4. The default is 1 for COM1.

 

HandShaking=1

HandShaking defines the data flow control. The allowable values are :

 

0 = no handshaking

1 = XON/XOFF

2 = RTS

3 = RTS and XON/XOFF

 

The default is 1 for XON/XOFF handshaking data flow.

 

Baud=9600

The serial port baud rate. The allowable values are : 1200, 2400, 4800, 9600 and 19200. The default is 9600 for 9600 baud.

 

Parity="N"

The serial port parity. The allowable values are :

 

"N" = none

"E" = even

"O" = odd

"M" = mark

"S" = space

 

The default is N for no parity checking on the serial port.

 

DataBits=8

The serial port data bits. The allowable values are 4 or 8. The default is 8 for 8 databits.

 

StopBits=1

The serial port stop bits. The allowable values are 1 or 2. The default is 1 for 1 stop bit.