SOURce:FUNCtion:HALT
Syntax
SOURce:FUNCtion:HALT (@<ch_list>)
Description
This command immediately stops the trace outputs from the specified channels on the 34951A Isolated DAC Module. The output remains enabled and is maintained at the level presently being output at the time the waveform was stopped.
Used With:
34951A Isolated DAC Module
Parameters
Name |
Type |
Range of Values |
Default Value |
<ch_list> |
Numeric |
One or more channels in the form (@sccc).
|
This is a required parameter |
Remarks
To restart a halted waveform, use the SOURce:FUNCtion:TRIGger:IMMediate command. The waveform begins at the specified starting index and the specified gain and offset remain in effect.
Example
The following command stops trace outputs on DAC channels 1 and 2 in slot 4.
SOUR:FUNC:HALT (@4001,4002)
See Also
SOURce:FUNCtion:CURRent:OFFSet