[SENSe:]TOTalize:SLOPe
Syntax
[SENSe:]TOTalize:SLOPe <slope>, (@<ch_list>)
[SENSe:]TOTalize:SLOPe? (@<ch_list>)
Description
This command configures the specified totalizer channels to count on the rising edge (positive) or falling edge (negative) of the input signal.
Used With:
34950A Digital I/O Module (counter channels only)
34952A Multifunction Module (totalizer channels only)
Parameters
Name |
Type |
Range of Values |
Default Value |
<slope> |
Discrete |
{NEGative|POSitive} |
POSitive (rising edge) |
<ch_list> |
Numeric |
One or more counter/totalizer channels in the form (@sccc). 34950A: s301,
s302 |
This is a required parameter |
Remarks
The selected slope is stored in volatile memory and will be set to "POS" when power is turned off or after a Factory Reset (*RST command).
Return Format
The query command returns "NEG" or "POS" for the specified channels. Multiple responses are separated by commas.
Examples
The following command configures totalizer channels 301 and 302 on the 34950A in slot 3 to count on the negative edge (falling) of the input signal.
TOT:SLOP NEG,(@3301,3302)
The following query returns the edge setting on totalizer channels 301 and 302 on the 34950A in slot 3.
TOT:SLOP? (@3301,3302)
Typical Response: NEG,NEG