DISPlay:TEXT:CLEar
Syntax
DISPlay:TEXT:CLEar
Description
This command clears the text message displayed on the upper line of the instrument's front-panel display (see DISPlay:TEXT command).
Remarks
Clearing the text message does not override the display state (see DISPlay:STATe command); if the display was disabled prior to clearing the text message, the display will remain disabled.
Pressing any front-panel button will also clear the text message. To prevent this, use the SYSTem:LOCK:REQuest? command.
The front-panel display is automatically cleared when power is cycled, after a Factory Reset (*RST command), or after an Instrument Preset (SYSTem:PRESet command).
Example
The following command clears the text message on the front panel.
DISP:TEXT:CLEAR