[SENSe:]CURRent[:DC]:APERture:ENABled?
Syntax
[SENSe:]CURRent[:DC]:APERture:ENABled? [(@<ch_list>)]
Description
This command queries whether the aperture mode is enabled or disabled for dc current measurements on the specified channels. If you omit the optional <ch_list> parameter, this command applies to the internal DMM, independent of any channels or a scan list.
Used With:
34921A Armature Multiplexer (channels 41 through 44 only)
Parameters
Name |
Type |
Range of Values |
Default Value |
<ch_list> |
Numeric |
One or more channels in the form (@sccc). Current measurements are allowed only on channels 41 through 44 on the 34921A. |
If <ch_list> is omitted, this command applies to the internal DMM. |
Remarks
The CONFigure, MEASure?, [SENSe:]CURRent[:DC]:NPLC, and [SENSe:]CURRent[:DC]:RESolution commands automatically disable the aperture mode (these commands select an integration time in NPLCs).
Return Format
The query command returns "0" is the aperture mode is disabled or "1" if the aperture mode is enabled for each channel specified. Multiple responses are separated by commas.
Example
The following command returns the state of the aperture mode on channels 41 and 42 in slot 1.
CURR:DC:APER:ENAB? (@1041,1042)
Typical Response: 1,1