SOURce:DIGital:MEMory:ABORt
Syntax
SOURce:DIGital:MEMory:ABORt (@<ch_list>)
Description
This command aborts buffered (memory) output operations on the 34950A Digital I/O Module. You can execute this command while a buffered output operation is in progress. The width of the first channel in each bank (i.e., channels 101 and 201) controls the width of the memory operations (64K x 8 Bits, 64K x 16 Bits, or 32K x 32 Bits). The first channel on the specified bank must be configured as an output prior to starting a buffered write (see SOURce:DIGital:DATA[:<width>] command) and a trace must be downloaded to memory and assigned to the specified bank (see SOURce:DIGital:MEMory:TRACe command).
Used With:
34950A Digital I/O Module
Parameters
|
Name |
Type |
Range of Values |
Default Value |
|
<ch_list> |
Numeric |
The first channel on a bank in the form (@sccc).
|
This is a required parameter |
Remarks
Depending on the width specified (see SOURce:DIGital:DATA[:<width>] command), the channel numbering is modified as shown below. For example, if you specify the width as a 16-bit WORD, channels 101 and 102 are combined and addressed collectively as channel 101.
|
|
Bank 2 |
Bank 1 |
||||||
|
BYTE (8 Bits): |
Ch 204 |
Ch 203 |
Ch 202 |
Ch 201 |
Ch 104 |
Ch 103 |
Ch 102 |
Ch 101 |
|
WORD (16 Bits): |
Ch 203 |
Ch 201 |
Ch 103 |
Ch 101 |
||||
|
LWORd (32 Bits): |
Ch 201 |
Ch 101 |
||||||
Example
The following command aborts the buffered output operations on channels 101 and 201 on the module in slot 3.
SOUR:DIG:MEM:ABOR (@3101,3201)
See Also
SOURce:DIGital:MEMory:ABORt
SOURce:DIGital:MEMory:NCYCles
SOURce:DIGital:MEMory:TRACe