Calculate Subsystem Introduction

34980A

CALCulate Subsystem Introduction

The internal DMM is required to store readings in memory and perform calculations. Readings can be acquired during a scan using the 34980A multiplexer modules listed below or by the internal DMM independently.

34921A

40-Channel Armature Multiplexer (including temperature and current)

34922A

70-Channel Armature Multiplexer

34923A

40/80-Channel Reed Multiplexer

34924A

70-Channel Reed Multiplexer

34925A

40/80-Channel FET Multiplexer

Command Summary
 

Hold the mouse cursor over a command to view the full syntax statement.

 

Alarm Limits

     |MIN|MAX|DEF}, (@)">CALCulate:LIMit:LOWer

     )" href="Alarms/CALCulate_LIMit_LOWer.htm">CALCulate:LIMit:LOWer?

     )" href="Alarms/CALCulate_LIMit_LOWer_STATe.htm">CALCulate:LIMit:LOWer:STATe

     )" href="Alarms/CALCulate_LIMit_LOWer_STATe.htm">CALCulate:LIMit:LOWer:STATe?

     |MIN|MAX|DEF}, (@)" href="Alarms/CALCulate_LIMit_UPPer.htm">CALCulate:LIMit:UPPer

     )" href="Alarms/CALCulate_LIMit_UPPer.htm">CALCulate:LIMit:UPPer?

     )" href="Alarms/CALCulate_LIMit_UPPer_STATe.htm">CALCulate:LIMit:UPPer:STATe

     )" href="Alarms/CALCulate_LIMit_UPPer_STATe.htm">CALCulate:LIMit:UPPer:STATe?

 

Mx+B Scaling

      [, (@)]" href="Mx+B_Scaling/CALCulate_SCALe_GAIN.htm">CALCulate:SCALe:GAIN

     )" href="Mx+B_Scaling/CALCulate_SCALe_GAIN.htm">CALCulate:SCALe:GAIN?

      [, (@)]" href="Mx+B_Scaling/CALCulate_SCALe_OFFSet.htm">CALCulate:SCALe:OFFSet

     )" href="Mx+B_Scaling/CALCulate_SCALe_OFFSet.htm">CALCulate:SCALe:OFFSet?

     )]" href="Mx+B_Scaling/CALCulate_SCALe_STATe.htm">CALCulate:SCALe:STATe

     )]" href="Mx+B_Scaling/CALCulate_SCALe_STATe.htm">CALCulate:SCALe:STATe?

     " [, (@)]" href="Mx+B_Scaling/CALCulate_SCALe_UNIT.htm">CALCulate:SCALe:UNIT

     )]" href="Mx+B_Scaling/CALCulate_SCALe_UNIT.htm">CALCulate:SCALe:UNIT?

 

Measurement Statistics

     )]" href="Statistics/CALCulate_AVERage_AVERage_.htm">CALCulate:AVERage:AVERage?

     )]" href="Statistics/CALCulate_AVERage_CLEar.htm">CALCulate:AVERage:CLEar

     )]" href="Statistics/CALCulate_AVERage_COUNt_.htm">CALCulate:AVERage:COUNt?

     )]" href="Statistics/CALCulate_AVERage_MAXimum_TIME_.htm">CALCulate:AVERage:MAXimum:TIME?

     )]" href="Statistics/CALCulate_AVERage_MAXimum_.htm">CALCulate:AVERage:MAXimum?

     )]" href="Statistics/CALCulate_AVERage_MINimum_TIME_.htm">CALCulate:AVERage:MINimum:TIME?

     )]" href="Statistics/CALCulate_AVERage_MINimum_.htm">CALCulate:AVERage:MINimum?

     )]" href="Statistics/CALCulate_AVERage_PTPeak_.htm">CALCulate:AVERage:PTPeak?

 

Digital Input Pattern Comparison

     , (@)">CALCulate:COMPare:DATA[:<width>]

     )" href="Pattern_Compare/CALCulate_COMPare_DATA.htm">CALCulate:COMPare:DATA?

     , (@)" href="Pattern_Compare/CALCulate_COMPare_MASK.htm">CALCulate:COMPare:MASK[:<width>]

     )" href="Pattern_Compare/CALCulate_COMPare_MASK.htm">CALCulate:COMPare:MASK?

     )" href="Pattern_Compare/CALCulate_COMPare_STATe.htm">CALCulate:COMPare:STATe

     )" href="Pattern_Compare/CALCulate_COMPare_STATe.htm">CALCulate:COMPare:STATe?

     )" href="Pattern_Compare/CALCulate_COMPare_TYPE.htm">CALCulate:COMPare:TYPE

     )" href="Pattern_Compare/CALCulate_COMPare_TYPE.htm">CALCulate:COMPare:TYPE?