CALCulate:AVERage:CLEar

34980A

CALCulate:AVERage:CLEar

Syntax

CALCulate:AVERage:CLEar [(@<ch_list>)]

Description

This command clears all values from the statistics registers for each the specified channels. Each channel must be a channel that has been configured to be part of the scan list. If you omit the optional <ch_list> parameter, this command applies to the internal DMM, independent of any channels or a scan list.

Used With:

  • 34921A through 34925A Multiplexer Modules

  • 34950A Digital I/O Module (digital input and counter channels only)

  • 34952A Multifunction Module (digital input and totalizer channels only)

Parameters

Name

Type

Range of Values

Default Value

<ch_list>

Numeric

One or more channels in the form (@sccc).

If <ch_list> is omitted, this command applies to the internal DMM.

Remarks

  • This command clears the minimum, maximum, average, count, and peak-to-peak values (but no readings are cleared from memory).

  • An error is generated if the internal DMM is disabled (see INSTrument:DMM[:STATe] command) or not installed in the mainframe.

  • The instrument clears the stored statistical data on all channels when a new scan is started, after a Factory Reset (*RST command), or after an Instrument Preset (SYSTem:PRESet command).

Return Format

This command has no query form.

Example

The following command clears the stored statistical data on channels 1 and 3 in slot 1.

CALC:AVER:CLE (@1001,1003)