Factory Reset State
The following tables show the state of the instrument after a *RST or SYSTem:CPON command is issued.
Measurement Configuration |
Factory Reset State |
Function |
DC Volts |
Range |
Autorange |
Resolution |
5 |
Integration Time |
1 PLC |
Input Resistance |
10 MΩ (fixed for all DCV ranges) |
Channel Labels |
No Change |
Channel Delay |
Automatic Delay |
Reading Format |
Reading Only (no units, channel, time) |
Sample Count |
1 Sample per Trigger |
Trigger Count |
1 Trigger |
Trigger Delay |
Automatic Delay |
Trigger Source |
Immediate |
Scanning Operations |
Factory Reset State |
Scan List |
Empty |
Reading Memory |
All Readings are Cleared |
Min, Max, and Average |
All Statistical Data is Cleared |
Sweep Count |
1 Sweep |
Trigger Interval |
1 Second |
Monitor in Progress |
Stopped |
Mx+B Scaling |
Factory Reset State |
Scaling State |
Off |
Gain Factor ("M") |
1 |
Offset Factor ("B") |
0 |
Scale Label |
Null String ( " " ) |
Alarm Limits |
Factory Reset State |
Alarm Queue |
Not Cleared |
Alarm State |
Off |
HI and LO Alarm Limits |
0 |
Alarm Output |
Alarm 1 |
Alarm Output Configuration |
Latched Mode |
Alarm Output State |
Output Lines are Cleared |
Alarm Output Slope |
Fail = Low |
Module Hardware |
Factory Reset State |
Multiplexer Modules: 34921A, 34922A, 34923A, 34924A, 34925A |
All Channels Open |
Matrix Modules: 34931A, 34932A, 34933A |
All Channels Open |
GP Modules: 34937A, 34938A, 34939A |
All Channels Open |
RF Modules: 34941A, 34942A |
Channels b01 and b03 Selected (b = Bank) |
Microwave Modules: 34945A, 34946A, 34947A |
34945A: All Channel Drives = Default |
System Control Modules: 34950A, 34951A, 34952A, 34959A |
34950A: DIO Ports = Input, Count = 0, |
System-Related Operations |
Factory Reset State |
Display State |
On |
Error Queue |
Errors Not Cleared |
Stored States |
No Change |
System Date |
No Change |
System Time |
No Change |
Temperature Units |
°C |