niHSDIO Configure Waveform To Generate
Sets the waveform to be generated upon a call to the niHSDIO Initiate VI when the generation mode parameter of the niHSDIO Configure Generation Mode VI is set to Waveform
If this function is not called and you have multiple waveforms in onboard memory, NI-HSDIO generates an error at initiate.
 |
instrument handle identifies your instrument session. instrument handle was obtained from the niHSDIO Init Acquisition Session VI or the niHSDIO Init Generation Session VI. | ||||||
 |
waveform name represents the name of the waveform to be generated at initiate. | ||||||
 |
error in describes error conditions that occur before this VI or function runs.
| ||||||
 |
instrument handle out passes a reference to your instrument session to the next VI. instrument handle was obtained from the niHSDIO Init Acquisition Session VI or the niHSDIO Init Generation Session VI. | ||||||
 |
error out contains error information. If error in indicates that an error occurred before this VI or function ran, error out contains the same error information. Otherwise, it describes the error status that this VI or function produces.
|
