NIHSDIO_ATTR_DIGITAL_EDGE_ADVANCE_TRIGGER_IMPEDANCE
Specific Attribute
| Data type |
Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|
| ViReal | R/W | N/A | None |
Description
Specifies the impedance on the channel configured for the digital edge Advance trigger. Valid values for this attribute vary by device.
Refer to the following table for the supported settings for your device. NI-HSDIO returns an error if you select an unsupported setting.
| Device | Supported Value |
|---|---|
| NI 654x | 100 |
| NI 655x | 50 or 10000 |
| NI 656x | 100 in LVDS terminal configuration 10000 in single-ended terminal configuration |
This attribute is only set if the trigger is configured to use a PFI channel, and it is ignored if the trigger is configured for any other channel.
Units: ohms