Markers: Basics
| Ref | Advanced | Function
| Search:
Bandwidth
| Compression
| PSAT
| PNOP
| Math
| Limits
| PassFail
| Statistics
| Gating
| Transform
| Eq
Editor
Description |
SCPI |
|
|---|---|---|
ON|OFF |
|
|
Delete All Markers |
|
|
Delete Marker |
|
|
Delta Marker |
|
|
Viewing Marker readouts |
|
|
Get a handle to Ref marker |
N/A |
|
Reference Marker On | Off |
|
|
Set and read X-axis location |
|
|
Read Y-axis location |
|
|
Interpolate All Markers (Discrete) |
None |
|
Interpolate Individ. Marker (Discrete) |
|
|
Type (Normal | Fixed) |
|
|
Format All Markers |
None |
|
Format Individ. Marker |
|
|
Coupled Markers |
|
|
Coupled Markers Method |
|
|
Read/Set Data Point number |
|
|
Read/Set X-axis value |
|
|
Read/Set Y-axis value |
|
|
Marker=> Span |
|
|
Marker=> Center (Freq) |
|
|
Marker=> CW Freq and change sweep type |
|
|
Marker=> Start (Freq) |
|
|
Marker=> Stop (Freq) |
|
|
Marker=> Elect. Delay |
|
|
Marker=> Ref. Level |
|
|
Marker=> CW Freq - No sweep type change |
|
|
Execute Search |
|
Select Search Function |
|
Maximum |
|
Minimum |
|
Target (Value) |
|
Excursion Value |
|
Threshold Value |
|
Assign Marker to Domain |
|
Domain Range Start |
|
Domain Range Stop |
|
Tracking |
|
Bandwidth (Target) |
|
Search Filter Bandwidth |
|
Read Filter BandWidth |
|
Read Filter Center Freq |
|
Read Filter Loss |
|
Read Filter Q |
|
Compression Marker level found. |
|
Read Compression Marker Input power |
|
Read Compression Marker Output power |
|
Search function |
|
Execute function |
|
Initiate a PSAT search |
|
Set and read PSAT backoff |
|
Read PSat Out |
|
Read PSat In |
|
Read PMax Out |
|
Read PMax In |
|
Read Gain Sat |
|
Read Gain Max |
|
Read Gain Linear |
|
Read Comp Sat |
|
Read Comp Max |
|
Initiate a PNOP search |
|
PNOP backoff |
|
PNOP Power Offset |
|
Read Pnop Out |
|
Read Pnop in |
|
Read Pnop Gain |
|
Read Pnop Comp |
|
Read PMax Out |
|
Read PMax In |
|
Read Gain Max |
|
Read Comp Max |
|
Read PBO Out |
|
Read PBO In |
|
Read PBO Gain |
|
Data Trace ON|OFF |
|
Memory Trace ON|OFF |
|
Data =>Memory |
|
Trace Math (Add|Sub|Mult|Div) |
|
Sets and reads the state of the memory data interpolation |
|
Display Lines ON|OFF |
|
Fail Sound ON|OFF |
|
Testing ON|OFF |
|
Limit Test Failed |
|
Count Limit Lines |
None |
Read Test Results |
|
Set / Read entire Limit Line |
|
Limit Line Type (Max|Min) |
|
Begin Stimulus |
|
End Stimulus |
|
Begin Response |
|
End Response |
|
Show Limit table |
|
Sets and returns the X-axis position of the Limit Line Pass/Fail indicator |
|
Sets and returns the Y-axis position of the Limit Line Pass/Fail indicator |
|
Show / hide the pass/fail dialog. |
|
Statistics ON|OFF |
|
Statistics Range |
|
Domain Range Start |
|
Domain Range Stop |
|
Set Type (Pk-Pk|StdDev|Mean) |
|
Get All Statistics Data |
|
Get Standard Deviation |
|
Get Mean |
|
Get Peak to Peak |
|
Transform ON|OFF |
|
Mode (LowPass, BandPass) |
|
Start Time |
|
Stop Time |
|
Center |
|
Span |
|
Step Rise Time |
|
Set Low Pass Frequency |
|
Enable trace coupling |
|
Set transform coupling parameters |
|
Specify measurement type for distance markers |
|
Specify units for distance markers |
|
Set and return marker distance value |
|
ON|OFF |
|
Type (BandPass, Notch) |
|
Shape |
|
Start |
|
Stop |
|
Center |
|
Span |
|
Set gate coupling parameters |
|
Kaiser Beta |
|
Impulse Width |
|
Turn ON / OFF equation |
|
Set equation |
|
Return validity of equation |
|
Returns the functions in DLL. |
|
Imports the functions in DLL |
|
Is DLL Imported? |
|
Remove a DLL |
|