(Read-Write)  Specifies the time domain gating parameters to be coupled. The settings for those parameters will be copied from the selected measurement to all other measurements on the channel.

• To enable Trace Coupling, use SENS:COUP:PAR

• To specify Transform parameters to couple, use CALC:TRAN:COUP:PAR

Learn more about Time Domain Trace Coupling

See Critical Note

Parameters

<cnum>

Channel number of the measurement. There must be a selected measurement on that channel. If unspecified, <cnum> is set to 1.

<num>

(Numeric) Parameters to couple. To specify more than one parameter, add the numbers.

1 - Gating Stimulus (Start, Stop, Center, and Span TIME settings.)

2 - Gating State (ON / OFF)

4 - Gating Shape  (Minimum, Normal, Wide, and Maximum)

8 - Gating Type  (Bandpass and Notch)

Examples

'To couple all parameters:

CALC:FILT:COUP:PAR 15

'To couple Stimulus and Type: calculate2:filter:gate:couple:parameters 9

Query Syntax

CALCulate<cnum>:FILTer:GATE:COUPle:PARameters?

Return Type

Numeric

Default

13 (All parameters except 2 - Gating State)

(Read-Write) Sets the gate filter center time.

See Critical Note

Parameters

<cnum>

Channel number of the measurement. There must be a selected measurement on that channel. If unspecified, <cnum> is set to 1.

<num>

Center time in seconds; Choose any number between:
± (number of points-1) / frequency span

Note: This command will accept MIN or MAX instead of a numeric parameter. See SCPI Syntax for more information.

Examples

CALC:FILT:GATE:TIME:CENT -5 ns
calculate2:filter:time:center maximum

Query Syntax

CALCulate<cnum>:FILTer[:GATE]:TIME:CENTer?

Return Type

Numeric

Default

0

(Read-Write) Sets the gating filter shape when in time domain.

See Critical Note

Parameters

<cnum>

Channel number of the measurement. There must be a selected measurement on that channel. If unspecified, <cnum> is set to 1.

<char>

Choose from
MAXimum - the widest gate filter available
WIDE -
NORMal -
MINimum - the narrowest gate filter available

Examples

CALC:FILT:GATE:TIME:SHAP MAX
calculate2:filter:time:shape normal

Query Syntax

CALCulate<cnum>:FILTer[:GATE]:TIME:SHAPe?

Return Type

Character

Default

NORMal

(Read-Write) Sets the gate filter span time.

See Critical Note

Parameters

<cnum>

Channel number of the measurement. There must be a selected measurement on that channel. If unspecified, <cnum> is set to 1.

<num>

Time span in seconds; Choose any number between:
0 and 2* [(number of points-1) / frequency span]

Note: This command will accept MIN or MAX instead of a numeric parameter. See SCPI Syntax for more information.

Examples

CALC:FILT:GATE:TIME:SPAN 5 ns
calculate2:filter:time:span maximum

Query Syntax

CALCulate<cnum>:FILTer[:GATE]:TIME:SPAN?

Return Type

Numeric

Default

20 ns

(Read-Write) Turns gating state ON or OFF.

See Critical Note

Note: Sweep type must be set to LInear Frequency in order to use Transform Gating.

Parameters

<cnum>

Channel number of the measurement. There must be a selected measurement on that channel. If unspecified, <cnum> is set to 1.

<boolean>

ON (or 1) - turns gating ON.
OFF (or 0) - turns gating OFF.

Examples

CALC:FILT:TIME:STAT ON
calculate2:filter:gate:time:state off

Query Syntax

CALCulate<cnum>:FILTer[:GATE]:TIME:STATe?

Return Type

Boolean (1 = ON, 0 = OFF)

Default

OFF

(Read-Write) Sets the gate filter start time.

See Critical Note

Parameters

<cnum>

Channel number of the measurement. There must be a selected measurement on that channel. If unspecified, <cnum> is set to 1.

<num>

Start time in seconds; any number between:
± (number of points-1) / frequency span

Note: This command will accept MIN or MAX instead of a numeric parameter. See SCPI Syntax for more information.

Examples

CALC:FILT:TIME:STAR 1e-8
calculate2:filter:gate:time:start minimum

Query Syntax

CALCulate<cnum>:FILTer[:GATE]:TIME:STARt?

Return Type

Numeric

Default

10 ns

(Read-Write) Sets the gate filter stop time.

See Critical Note

Parameters

<cnum>

Channel number of the measurement. There must be a selected measurement on that channel. If unspecified, <cnum> is set to 1.

<num>

Stop time in seconds; any number between:
± (number of points-1) / frequency span

Note: This command will accept MIN or MAX instead of a numeric parameter. See SCPI Syntax for more information.

Examples

CALC:FILT:TIME:STOP -1 ns
calculate2:filter:gate:time:stop maximum

Query Syntax

CALCulate<cnum>:FILTer[:GATE]:TIME:STOP?

Return Type

Numeric

Default

10 ns

(Read-Write) Sets the type of gate filter used.

See Critical Note

Parameters

<cnum>

Channel number of the measurement. There must be a selected measurement on that channel. If unspecified, <cnum> is set to 1.

<char>

Choose from:
BPASs - Includes (passes) the range between the start and stop times.
NOTCh - Excludes (attenuates) the range between the start and stop times.

Examples

CALC:FILT:TIME BPAS
calculate2:filter:gate:time:type notch

Query Syntax

CALCulate<cnum>:FILTer[:GATE]:TIME[:TYPE]?

Return Type

Character

Default

BPAS