Save
/Recall | Manage
Files | Manage Folders
| Print | Read
Clock
Preset (User) | Security
| Configure
Hdwr & Capabilities | Macros | Status
| GPIB
Pass-through | VISA Pass-through | Preferences
SCPI |
||
|---|---|---|
Preset |
|
|
Preset plus delete window |
|
Frequency Blanking |
|
Local Lockout |
|
Set and return GPIB address |
None |
Set PNA to GPIB system controller or talker/listener |
None |
Set and return SICL address |
None |
Control the PNA via SICL |
None |
Return Full computer name |
None |
System Impedance |
|
Load Test Set Config file and Restart PNA. |
|
Hardware |
|
IO Configuration |
None |
DSP Revision |
|
DSP FPGA |
|
CPU Speed |
|
Hostname |
|
Many queries regarding the capability of a specific VNA |
|
Execute Macro |
|
Delete Macro |
|
Write macro path, argument, and title |
|
Read macro path, argument, and title |
|
Status Registers |
|
*OPC;*WAI |
|
Open a GPIB pass-through session |
|
Write string data to the GPIB pass-through device. |
|
Write data to the GPIB pass-through device - with header. |
|
Write data to the GPIB pass-through device - without header. |
|
Reads string data from the GPIB pass-through device. |
|
Closes a GPIB pass-through session |
|
Closes ALL GPIB pass-through sessions |
|
Returns list of visa address strings or aliases. |
|
Sets timeout value for VISA pass-through commands. |
|
Reset Preference default settings |
|
Selected trace is wider. |
None |
Selected trace changes width briefly. |
None |
Cal: Auto-save User Cal Set |
|
Cal: For Guided Cal, set external trigger. |
|
Cal: For Unguided Cal, set external trigger. |
|
Cal: Simulated Cal Behavior |
|
Cal: Use Primary FOM (for mmWave) |
|
Memory: Sets and reads the state of the memory data interpolation default preference |
|
Memory: Data Math 8510 Mode |
None |
Meas: Mathematical offset for receiver attenuation |
|
Meas: Mathematical offset for source attenuation |
|
Meas: RF power On during frequency sweep retrace |
|
Meas: Power Sweep Retrace |
|
Meas: External Trigger OUT is Global |
|
Meas: Port 1 Noise Tuner Switch state |
|
Meas: Draw failed trace segments in red |
|
Meas: Draw limit lines in red |
|
Marker: Programming treats Mkr 10 as Reference |
|
Markers: On Preset, Coupled Markers is ON |
|
Markers: On Preset, Coupling Method is Channel |
|
Markers: Coupling controls on|off state of markers. |
|
Report source unleveled events as errors |
|
Ext Device: de-activate on PRESET and recall. |
|
On PRESET set two-point group delay aperture |
|
On PRESET always turn power ON |
|
On PRESET show Quick Start dialog |
|
Report when receiver is overloaded |
|
Turn source power OFF when receiver is overloaded |
|
More buttons |
|
Define Data Saves |
|
User Preset |
|
User Key |
None |
Printer Page Setup |
|
Millimeter settings |
None |
Power Limit |
|
Display and Print Colors |
|
Returns Structured status of the PNA networking configuration. |
None |
Returns string status of the PNA networking configuration. |
None |
Resets the PNA LAN configuration. |
None |
Modifies settings of the PNA computer networking configuration. |
None |
Displays the LAN Status dialog with LAN Status Indicator showing IDENTIFY. |
|
Enable the display of Error Messages |
|
Timed vs Dialog messages |
None |