(Read-Write) Sets the sweep mode as Chopped or Alternate.

Learn about Alternate Sweep

Parameters

<cnum>

Any existing channel number; if unspecified, value is set to 1.

<ALL | NONE>

ALL - Sweep mode set to Chopped - reflection and transmission measured on the same sweep.

NONE - Sweep mode set to Alternate - reflection and transmission measured on separate sweeps. Improves Mixer bounce and Isolation measurements. Increases sweep time

Examples

SENS:COUP ALL
sense2:couple none

Query Syntax

SENSe<cnum>:COUPle?

Return Type

Character

Default

ALL

(Read-Write)  Turns ON and OFF Time Domain Trace Coupling. All of the measurements in the specified channel are coupled.

• To select Transform parameters to couple, use CALC:TRAN:COUP:PAR

• To select Gating parameters to couple, use CALC:FILT:COUP:PAR

Learn more about Time Domain Trace Coupling.

Parameters

<cnum>

Any existing channel number; if unspecified, value is set to 1.

<bool>

ON (or 1) - Turns ON Time Domain Trace Coupling.

OFF (or 0) - Turns OFF Time Domain Trace Coupling.

Examples

SENS:COUP:PAR 0
sense2:couple:parameter:state on

Query Syntax

SENSe<cnum>:COUPle:PARameter[:STATe]?

Return Type

Boolean

Default

ON (or 1)