Sense:Roscillator Command
SENSe:ROSCillator:SOURce <state>
(Write-only) Set and read 10 MHz Reference Oscillator state. Note: This setting is NOT cleared with Preset. However, it does clear when the M937xA software is restarted. |
|
Parameters |
|
<state> |
Choose from the following: INTernal - Use the internal 10 MHz Reference Oscillator EXTernal - Use an external Reference Oscillator. Use SENSe:ROSCillator:SOURce:CONDition? to determine if the M937xA is locked to the external oscillator. |
Examples |
SENS:ROSC:SOUR INT sense:roscillator:source external |
Query Syntax |
Not applicable |
Return Type |
Not applicable |
INTernal |
|
SENSe:ROSCillator:SOURce:CONDition?
(Read-only) Reads the 10 MHz Reference Oscillator 'locked' condition. When SENS:ROSC:SOUR is set to Internal, this command will always return "LOCKed". When SENS:ROSC:SOUR is set to External, then this function takes about 100 usec to read the state of the hardware. |
|
Examples |
SENS:ROSC:SOUR |
Return Type |
Character |
Not applicable |
|