Step 3. Test iiiFN03 and iiiFN04 functions
INT003 - Using the FTP Service
1. Compile your iiiFN03 and iiiFN04 functions.
2. Check that both functions compiled successfully.
3. Execute your iiiFN04 function. Your function might appear as follows:
When the function executes, the values for the FTP Host, FTP Folder Path, FTP User and FTP Password fields are very specific to the FTP server you are using.
You should be able to obtain these details from your installation administrator if you don't know them.
|
FTP Host |
Enter the name or IP address of the FTP Server to connect to. |
| FTP Folder Path |
Enter the FTP folder name where to get the file list. It must be preceded by a forward slash (/). Leave blank to get the list of files from the root directory. |
| FTP UserFTP Password |
Most FTP servers require User authentication. *** |
*** As currently defined, the password field is limited to 10 characters and upper case only. If this is unsuitable for your server, change the definition of field S_218PSWD. For example increase its length and allow lower case characters.
Once the details have been entered, press OK to get the list of files.
4. The function might appear as follows:
