NI PXI-2575
The NI PXI-2575 is a 196×1 multiplexer relay module for the PXI platform. The NI PXI-2575 is composed of 98 SPST and 1 SPDT armature latching relays.
For certain applications, you may need to increase the default settling time. Refer to Adding Additional Settling Time for more information.
![]() |
Note For EMC compliance, operate this device with shielded cables. |
Operation Modes
The following table lists the supported topology of the NI PXI-2575 and possible operation modes.
Topology | Software Name | Immediate | Scanning |
---|---|---|---|
1-Wire 196×1 Multiplexer | 2575/1-Wire 196x1 Mux (NISWITCH_TOPOLOGY_2575_1_WIRE_196X1_MUX) |
![]() |
![]() |
2-Wire 98×1 Multiplexer | 2575/2-Wire 98x1 Mux (NISWITCH_TOPOLOGY_2575_2_WIRE_98X1_MUX) |
![]() |
![]() |
2-Wire 95×1 Multiplexer | 2575/2-Wire 95x1 Mux (NISWITCH_TOPOLOGY_2575_2_WIRE_95X1_MUX) |
![]() |
![]() |
![]() |
Note When using either the SH200LFH-4xDB50F-S or SH200LFH-BARE WIRE cable with the NI PXI-2575 in the 2-wire 98×1 topology, CH95, CH96, and CH97 will have lower RF performance than the other 95 channels because they are not in twisted pairs in the cable. To avoid using these channels, NI-SWITCH has support for a 2-wire 95×1 topology that does not include CH95, CH96, and CH97. |