NI SCXI-1127/1128

NI Switches

NI SCXI-1127/1128

The NI SCXI-1127 and the NI SCXI-1128 are high-density, high-voltage multiplexer/matrix modules for the SCXI platform. The NI SCXI-1127 is composed of armature relays, and the NI SCXI-1128 uses solid-state relays. The NI SCXI-1127/1128 support routing signals to the high-voltage analog bus.

Note Note  For EMC compliance, operate this device with shielded cables.
Notes  The NI SCXI-1127/1128 only support continuous scanning.
If you configure the NI SCXI-1127/1128 as a Traditional NI-DAQ (Legacy) Device, you can only select the 2-wire 32×1 multiplexer, 2-wire 4×8 matrix, and independent topologies. To use the NI SCXI-1127/1128 as 1-wire, 2-wire, and 4-wire multiplexer, select the 2-wire 32×1 multiplexer topology and configure all channels appropriately in Measurement and Automation Explorer (MAX).

NI SCXI-1127 Operation Modes

The following table lists the supported topologies of the NI SCXI-1127 and possible operation modes.

Topology Software NameImmediate Scanning
1-Wire 64×1 Multiplexer1127/1-Wire 64x1 Mux
(NISWITCH_TOPOLOGY_1127_1_WIRE_64X1_MUX)
2-Wire 32×1 Multiplexer1127/2-Wire 32x1 Mux
(NISWITCH_TOPOLOGY_1127_2_WIRE_32X1_MUX)
4-Wire 16×1 Multiplexer1127/4-Wire 16x1 Mux
(NISWITCH_TOPOLOGY_1127_4_WIRE_16X1_MUX)
2-Wire 4×8 Matrix1127/2-Wire 4x8 Matrix
(NISWITCH_TOPOLOGY_1127_2_WIRE_4X8_MATRIX)
Independent1127/Independent
(NISWITCH_TOPOLOGY_1127_INDEPENDENT)

NI SCXI-1128 Operation Modes

The following table lists the supported topologies of the NI SCXI-1128 and possible operation modes.

Topology Software NameImmediate Scanning
1-Wire 64×1 Multiplexer1128/1-Wire 64x1 Mux
(NISWITCH_TOPOLOGY_1128_1_WIRE_64X1_MUX)
2-Wire 32×1 Multiplexer1128/2-Wire 32x1 Mux
(NISWITCH_TOPOLOGY_1128_2_WIRE_32X1_MUX)
4-Wire 16×1 Multiplexer1128/4-Wire 16x1 Mux
(NISWITCH_TOPOLOGY_1128_4_WIRE_16X1_MUX)
2-Wire 4×8 Matrix1128/2-Wire 4x8 Matrix
(NISWITCH_TOPOLOGY_1128_2_WIRE_4X8_MATRIX)
Independent1128/Independent
(NISWITCH_TOPOLOGY_1128_INDEPENDENT)