NI PXI-2532 2-Wire 8×32 Matrix Topology

The NI TB-2644 terminal block creates a 2-wire 8×32 matrix topology with the NI PXI-2532. The following figure represents the NI PXI-2532 in the 2-wire 8×32 matrix topology.

Making a Connection

Both the scanning command, r6->c1;, and the immediate operation, niSwitch Connect Channels VI or the niSwitch_Connect function with parameters r6 and c1, result in the following connections:

signal connected to R6+ is routed to C1+

signal connected to R6– is routed to C1–

Terminal Block Connections

The NI TB-2644 terminal block connects the banks of the NI PXI-2532 to create the 2-wire 8×32 matrix topology. The following figure illustrates how the native banks on the NI PXI-2532 connect using the NI TB-2644 to create the 2-wire 8×32 matrix topology.

Bank Connection Diagram

The following tables list the pin assignments for the NI TB-2644 column connection board.

Row Pin Connections

The NI TB-2644 provides two ribbon cable headers for row connection. Use one cable header to connect to your application. Use the other cable header for column expansion.

The following table lists the pin assignments for row connection.

Pinout

The following figure identifies the pins for the NI PXI-2532.

Caution  Low-voltage pins are reserved for future use. These pins should remain disconnected and isolated from row and column channels when high voltage is present.