General
After opening an existing project, the 'Work Items' table
appears, where you can view all of your project’s work items as you entered them
in the WBS (See General/WBS (Ctrl+Β) 
), as well as the measurements you have linked with each
work item.
The 'Work Items' tree view table, by default, shows in columns the description of WBS work-items and measurements, the measurement sheets from which the measurements were derived, the measurement unit, the quantity, the color and the ‘Visible’ check box. Using the filtering, grouping, column selection, and sorting tools, you have many options of setting the number, the form, and the type of the data you wish to view (See Appendix/Filters/Sorting).
The quantity (result value) of a
measurement in the ‘WBS’ tree view might be different of the quantity of the
same measurement in the ‘Drawings’ tree view. This is due to the reason that in
the ‘Drawings’ tab appear the quantities of the primary measurements, while in
the ‘WBS’ tab appear the quantities that have been associated (linked) to each
work item and might have been modified by an expression formula (See Measurement
in image files/Types and method of measurement/Work item).
Only measurements that are checked as ‘Visible’
appear in the current drawing window. Click the ‘Visible’ check box of a
measurement to change its status or double click on the measurement row to make
it visible.
Click on the header of the 'Drawing', 'Unit' and 'Quantity' fields etc. in order to sort the table's contents based on the above fields (See Appendix/Filters/Sorting).
By double-clicking on a work item that contains measurements, you can collapse or expand them. Alternatively, you can click on the 6 downward arrow symbol to collapse and on the 4 right-ward arrow to expand.
If a work item includes more than one measurement on the same drawing, e.g. ceramic floors, by double-clicking on one of its measurements, the corresponding drawing is opened, and all measurement layers that relate to this work item in this drawing are enabled.
When you double click for
the first time on a measurement of a measurement sheet that is either closed or
open but not current, then only the measurements that are associated with the
same work item appear in the drawing window. All other measurements remain
invisible. This way, tracking of the areas that have not been measured yet, is
greatly facilitated.
You can expand or collapse the ‘WBS’ tab
tree view, by right clicking in the tab area. (See Drawings)
