PicoScope 2000 Edit Measurement

PicoScope 2000 Edit Measurement

Accessed via the Edit button in the PicoScope2000 Measurements dialog box.

This dialog box is used to enter the details for a measurement.

Name.  This is the name of the measurement. It will appear on all reports.

Channel.  This is the channel to be used for the measurement.

Measurement.  This specifies the type of measurement that will be made. The options are:

DC volts - the DC component or average input voltage.

AC volts - the RMS AC voltage (note that this excludes any DC component).

dB - AC volts converted to decibels.

Frequency - the frequency of the AC component, in hertz.

Voltage range.  This specifies the voltage range for the measurement.

Scan time.  This is the total time to take the set of readings for a sample. The frequency range available at the selected scan time is displayed below this field ... the frequency range will set the default maximum / minimum limits of the PLW Graph window when the Measurement: 'Frequency' is selected.

Options.  To set the options for the measurement (such as units and scaling) click Options. This will open the Parameter options dialog box.