Getting Started > Hardware Requirements
To run WinWCP you will require an IBM PC-compatible personal computer with at least 16Mbyte of RAM, a 66MHz 80486 (or better) CPU, and the Microsoft Windows 95, 98, NT V4, 2000, XP (32 bit), Vista or Windows 7 (32 bit) and (64 bit) operating systems.
A laboratory interface unit is required to perform analog-digital (A/D) and digital-analog (D/A) conversion of the signals and stimulus waveforms. The following families of laboratory interfaces are supported:
· Cambridge Electronic Design 1401, 1401-plus, Micro 1401, Power 1401.
· National Instruments laboratory interface cards.
· Axon Instruments Digidata 1200, 1320/22, 1440/A, 1550 or 1550A . (Note. Data acquisition is not supported with the Digidata 1200 and 132X interfaces under Windows 7 (64 bit).
· Instrutech ITC-16 or ITC-18.
· Heka EPC-9, EPC-10.
· Biologic VP500.
· Tecella Pico, Triton, Triton Plus.