OPC Settings

NI-DAQ Measurement & Automation Explorer

previous page next page

OPC Settings

To configure your OLE for Process Control (OPC) settings, follow these steps:

  1. Expand Devices and Interfaces»Traditional NI-DAQ (Legacy) Devices in the configuration tree.
  2. Right-click the device you want to configure, and select Properties.

    –or–

    Select the device, and click Properties at the top of the Attributes pane.
  3. Click the OPC tab and set the analog input calibration period for the DAQ/OPC server.
Note  You must install the OPC server during NI-DAQ installation to enable OPC settings.
previous page start next page