Editing AI Miscellaneous Properties
The Miscellaneous section defines values used only with specific types of measurement. Depending on the measurement, some or all of the properties may be disabled.
| Current Sense Resistor Value | Enter the resistor value in ohms. Selecting a current input channel enables this value for editing. |
| Resonant Frequency | Enter the resonant frequency value in hertz. Selecting an accelerometer input channel enables this value for editing. |
| Excitation Source, Current/Voltage | Select the excitation source. Depending on the measurement, either enter a current value in milliamps or a voltage value in volts. Selecting a resistance, RTD, accelerometer, LVDT/RVDT, or strain gauge input channel enables this value for editing. |
| Sensitivity Units, Value | Select the sensitivity value units. Enter a sensitivity value. Selecting a RTD, accelerometer, or LVDT/RVDT input channel enables this value for editing. |
| CJC Source, User Channel, Temperature | Select a value for CJC source. If the source is a user value, enter a value in the Temperature edit box. If the source is user-supplied, select a user-defined channel. Selecting a known-type thermocouple or custom thermocouple input channel enables this value for editing. |