Testing SCXI Configuration

NI-DAQ Measurement & Automation Explorer

Testing SCXI Configuration

To test your SCXI configuration, follow these steps:

  1. In the configuration tree, right-click the SCXI chassis you want to test.
  2. Select Test.

MAX verifies your SCXI configuration by reading the module ID of each configured SCXI module and comparing it against the modules you configured. MAX notifies you if there is any discrepancy, or if the SCXI communication path was not set up correctly.

Refer to your SCXI device documentation for troubleshooting information.

Note  Neither DAQ devices running in LabVIEW Real-Time nor the PCI-7041 RT Series DAQ device currently support SCXI configuration testing.