Measurement & Automation Explorer Help for Traditional NI-DAQ™ (Legacy), version 7.x
August 2005 Edition, Part Number 370041G-01
This help file contains information on configuring and testing DAQ and SCXI products using Measurement & Automation Explorer (MAX) for Traditional NI-DAQ (Legacy), and information on special considerations for operating systems.
 |
Caution Traditional NI-DAQ (Legacy) is an older driver with outdated application programming interfaces (APIs) for developing data acquisition, instrumentation, and control applications for older National Instruments DAQ devices. You should use Traditional NI-DAQ (Legacy) only in certain circumstances. Refer to the NI-DAQ Readme for more information about when to use Traditional NI-DAQ (Legacy), including a complete list of supported devices, operating systems, application software versions, and language versions. Refer to the NI-DAQmx Help, which you can access from Start»Programs» National Instruments»NI-DAQ»NI-DAQmx Help, for an overview of the two NI-DAQ APIs and the advantages of NI-DAQmx. In NI application software, this same help is available by searching for NI-DAQmx. You can install the latest version of NI-DAQmx software, available at ni.com/downloads. |
To navigate this help file, use the Contents, Search, and Index tabs to the left of this window.
For more information about this help file, refer to the following topics:
Conventions—formatting and typographical conventions in this help file
Technical Support and Professional Services
To comment on National Instruments documentation, refer to the National Instruments Web site.
© 1999–2005 National Instruments Corporation. All rights reserved.