2.8 List of Values Rule
This display results when:
- An existing list of values rule has been chosen for review.
- A new list of values rule is to be added.
|
Note: File name is only displayed when working at file level. Change & Delete function keys are only enabled when an existing check is displayed.
If an existing rule is being reviewed then the CHANGE key can be used to place the screen in change mode and the required changes made.
If an existing rule is being reviewed then the DELETE key can be used to delete the rule. Note that the delete is immediate. No confirmation is required.
If a new rule is being added then the screen will be presented initially with default values. Change as required and press Enter to complete specification of the rule.
Input Options
These input options apply to a list of values rule:
Order to Process:
Mandatory, but always pre-filled to <highest order number + 10>. Validation rules are performed (and displayed) in the sequence of these order numbers (within the validation level). Order numbers must be unique within the validation level.
For instance the entries below would be performed in the sequence RULE04, RULE01, RULE02, RULE05, RULE03.
|
Source
Output field. Indicates the source or level at which the rule applies.
User Description of Rule
Mandatory. Enter a brief description of the rule to aid other users in understanding its purpose.
Use Rule When Performing
At least one entry required. Pre-filled to ADD and CHG. Specifies "when" the rule is to be performed. Allowable values are:
|
ADD |
When information is added (inserted) to the database. |
|
ADDUSE |
When information is added, and the field is actually specified/used in the INSERT command being executed. |
|
CHG |
When information is changed (updated) in the database. |
|
CHGUSE |
When information is changed, and the field is actually specified/used in the UPDATE command being executed. |
|
DLT |
When information is deleted (removed) from the database. |
Most commonly used entries are ADD, CHG and CHGUSE. Use of DLT by itself is a common and a very powerful check mechanism. If ADDUSE is specified, ensure that the default value of the field is a valid database value. Use caution when specifying CHGUSE with a rule that involves multiple fields, because the check will only be done when the field linked to the rule is specified on an UPDATE command, and not done when it is omitted, regardless of whether or not any of the other fields referenced in the rule are specified.
Check If Field Is in List
At least one entry in the list is required. A maximum of 50 entries can be specified (use roll keys to input). Values specified can be:
- An alphanumeric literal (in quotes) such as 'STATUS', 'JONES'
- A numeric literal such as 1, 14.23, -1.141217.
- Another field name such as CUSTNO, INVNUM, etc.
- A system variable name such as *BLANKS, *ZERO, *DATE or any other system variable defined at your installation.
- A process parameter such as *UP01, *UP02, etc.
Values are checked for type and length compatibility.
If Field Is in List Specified Above
Mandatory. Pre-filled to NEXT. Specifies what is to happen if the field is found to be in the list specified. Allowable values are:
|
NEXT |
Field is "okay". Proceed to next rule for this field. |
|
ERROR |
Field is in error. Issue error message described below. |
|
ACCEPT |
Field is okay. Bypass all other rules for this field. |
Else Field Is Not in the List Specified Above
Mandatory. Pre-filled to ERROR. Specifies what is to happen if the field is NOT found to be in the list specified. Allowable values are:
|
NEXT |
Field is "okay". Proceed to next rule for this field. |
|
ERROR |
Field is in error. Issue error message described below. |
|
ACCEPT |
Field is okay. Bypass all other rules for this field. |
Error Message Number, File And Library
Optional. Specify either error message number, file and library or error message text (described below), but not both. Error message files and error message numbers are a native part of the IBM i operating system. Refer to the IBM supplied for details. CL commands involving message files include CRTMSGF and ADDMSGD.
You can directly edit the message details from this screen. Enter as much of the message details as is known and use the function key labeled "Work Msgd" (Work Message Description). This will cause a WRKMSGD command to be executed, using as much of the supplied message details as is possible. This facility will allow you to create or edit the message details. Upon completion of the WRKMSGD command, this screen will be redisplayed, unchanged, to allow you to proceed.
Do not store user defined messages in, or modify "shipped" messages in, the LANSA message file DC@M01 via this or any other message file editing facility. It is regularly replaced by new version or PC (program change) installations.
Text
Optional. If you do not wish to use an error message file (described above) to store the message text, then you may enter the text of the error message to be displayed directly. If this facility is used then the message will have no second level text associated with it. Refer to the section on Messages and the Help Key.
If neither an error message number, file and library nor error message text is specified LANSA will insert a default error message number, file and library as the error message. These default messages are "general purpose" and do not provide much detail about the specific cause of the error.