Read Following Error

NI-Motion VI

previous page next page

Read Following Error

Reads the instantaneous following error for an axis or vector space.

Device Compatibility

Device	Compatibility
7330	Y
7340	Y
7344	Y
7350	Y
7390	Y
NI SoftMotion Controller for CANopen—Accelnet	Y
NI SoftMotion Controller for CANopen—Xenus	Y

Board ID is a unique number assigned by Measurement & Automation Explorer (MAX) used to send and receive commands and data to or from a specific NI motion controller.

Axis or Vector Space is the axis or vector space to read.

Retn Vect indicates the destination for the return data generated by this VI. Available return vectors include return data to the host (0xFF), to a variable (0x01 through 0x78), to an indirect variable (0x81 through 0xF8), and do not return data (0). Refer to Input and Return Vectors for more detailed information.

error in (no error) describes error conditions that occur before this VI runs. The default input of this cluster is no error. If an error already occurred, this VI returns the value of error in in error out. The VI runs normally only if no incoming error exists. Otherwise, the VI passes the error in value to error out. The error in cluster contains the following parameters:

	status is TRUE if an error occurred before this VI was called, or FALSE if not. If status is TRUE, code is a nonzero error code. If status is FALSE, code is zero or a warning code.
	code is a number identifying an error or warning. If status is TRUE, code is a nonzero error code. If status is FALSE, code is zero or a warning code. Use the error handler VIs to look up the meaning of this code and display the corresponding error message.
	source is a string that indicates the origin of the error, if any. Typically, source is the name of the VI in which the error occurred.

Following Error is the instantaneous difference between the commanded trajectory position and the actual feedback position in counts for servo systems and steps for stepper systems.

Bd ID Out is provided for flow control. You can string together NI-Motion VIs by wiring the Bd ID Out terminal of one VI to the Board ID terminal of the next VI.

Resource Output is the Axis, Vector Space, ADC, or Encoder you wired into the VI. Use Resource Output to pass the resource to another VI and/or to display information about the device.

error out contains error information. If error in indicates an error, error out contains the same error information. Otherwise, it describes the error status that this VI produces.

	status is TRUE if an error occurred, or FALSE if not. If status is TRUE, code is a nonzero error code. If status is FALSE, code is zero or a warning code.
	code is a number identifying an error or warning. If status is TRUE, code is a nonzero error code. If status is FALSE, code is zero or a warning code. Use the error handler VIs to look up the meaning of this code and display the corresponding error message.
	source is a string that indicates the origin of the error, if any. Typically, source is the name of the VI in which the error occurred.

Using This VI

The Read Following Error VI returns the instantaneous following error for the axis or vector space specified. For vector spaces, following error is the root-mean-square of the following errors for the individual axes that make up the vector space.

previous page start next page