6 4 Task Register User on the Data Application Server

6.4 Task: Register User on the Data/Application Server

The user to be registered is the user that you nominated during the LANSA installation. To register that user on the Data/Application Server, perform the following steps.

1.  Start the LANSA for the Web Administrator.

a.  Open the LANSA folder from the Start menu.

b.  Select the Settings and Administration folder.

c.  Select Web Administrator  from the list and click it to start.

     The LANSA Web Administrator main window will open:

2.  From the Options menu, select Connect... or press Ctrl +T to open the Connection Details dialog.

3.  Enter the following information:

LANSA System	Enter the LANSA system you created in the 6.3 Task: Define Data/Application Server Name.
Host Type	Select Other from the drop down list.
Partition identifier & Language	Set your Partition identifier and Language.
Userid	Enter the User Name you created in during the install.
Password	Enter corresponding password. (Note that the password is case sensitive.)
Save Password	Optional: Select option as required.

4.  Select the Save As... button and enter a Profile name to save these entries. (The Profile name can be any name you wish to use but it must be unique.)

5.  Now go to the Security Menu> Register User in the Web Administrator to register the user that will run the web job on the Data Application server.

Note: If the Web Administrator is connecting to a Data/Application Server that it is not compatible with, such as an earlier version, an error message will be issued. You will need to update your versions before continuing.