Vertical:Advanced:Digital Offset
Short Name: Digital Offset
Applies offset to the specified channel in hardware before any onboard signal processing occurs. The output of the digital gain/offset block is as follows:
(ADC value × digital gain) + digital offset
 |
Note This property can be used only with high-speed digitizers that support onboard signal processing (OSP). NI-SCOPE returns an error if you use this property with a device that does not support OSP. |
Units: Volts
Default Value: 0
Valid Values
±(Vertical Range × 0.4)
Remarks
The following table lists the characteristics of this property.
| Data Type | ViReal64 |
| Access | R/W |
| Channel Based | Yes |