Vertical:Advanced:Digital Gain

NI-SCOPE LabVIEW

Vertical:Advanced:Digital Gain

Short Name: Digital Gain

Applies gain to the specified channel in hardware before any onboard signal processing occurs. The output of the digital gain/offset block is as follows:

(ADC value × digital gain) + digital offset

Note  This property can be used only with high-speed digitizers that support onboard signal processing (OSP). NI-SCOPE returns an error if you use this property with a device that does not support OSP.

Units: Unitless

Default Value: 1

Valid Values: –1.5 to 1.5

Remarks

The following table lists the characteristics of this property.

Data Type ViReal64
Access R/W
Channel Based Yes