NI 5911 Properties and Default Values

NI-SCOPE LabVIEW

NI 5911 Properties and Default Values

The following table lists the property default values for NI 5911 digitizers. N/A indicates that the attribute is not supported by the device.

Property (Attribute)	Default Value
Acquisition Arm Source (Start Trigger Source)	Immediate
Acquisition Start Time	0
Acquisition Type	Normal
Actual Record Length	1000
Actual Sample Rate	1000000
Advance Trigger Source	N/A
Arm Reference Trigger Source	N/A
Backlog	0
Binary Sample Width	8
Channel Count	1
Channel Enabled	0
Class Group Capabilities	IviScopeBase, IviScopeWaveformMeasurement, IviScopeSampleMode, IviScopeAutoSetup, IviScopeTVTrigger
Clock Sync Pulse Source	No Source
Combined Decimation	N/A
Delay Before Initiate	0
Description	National Instruments High Speed Digitizers Oscilloscope Instrument Driver
Driver Prefix	niScope
Driver Vendor	National Instruments
Enable DC Restore	N/A
Enable DDC	N/A
Enable Dither	N/A
Enable Records Greater Than Memory	N/A
Enable TDC	N/A
Enforce Realtime	1
Event	N/A
Fetch Interleaved Data	0
Fetch Meas Num Samples	–1
Fetch Num Records	–1
Fetch Offset	0
Fetch Record Number	0
Fetch Relative To	Pretrigger
Horizontal Min Number of Points	1000
Input Clock Source	No Source
Input Impedance	1000000
Interchange Check	0
Line Number	N/A
Logical Name	—
Manufacturer	National Instruments
Master Enable	0
Max Input Frequency	100000000
Max Realtime Sampling Rate	100000000
Max RIS Rate	N/A
Measurement Array Gain	1
Measurement Array Offset	0
Channel Based High Ref	90
Channel Based Low Ref	10
Channel Based Mid Ref	50
Filter Center Frequency	1000000
Filter Cutoff Frequency	1000000
Filter IIR Order	2
Filter Ripple	0.1
Filter Taps	25
Percent Waveform Transient	20
Filter Type	Lowpass
Filter Width	1000
FIR Filter Window	0
Measurement Hysteresis Percent	2
Measurement Interpolation Sampling Factor	2
Measurement Last ACQ Histogram Size	256
Measurement Other Channel	0
Measurement_Polynomial Interpolation Order	1
Measurement Time Histogram High Time	0.0005
Measurement Time Histogram High Volts	10
Measurement Time Histogram Low Time	–0.0005
Measurement Time Histogram Low Volts	–10
Measurement Time Histogram Size	256
Measurement Voltage Histogram High Volts	10
Measurement Voltage Histogram Low Volts	–10
Measurement Voltage Histogram Size	256
Min Sample Rate	1000000
Model	NI PCI-5911
Channel Count	1
Output Clock Source	No Source
Percentage Units Method	Base Top
PLL Locked	N/A
Points Done	1000
Polarity	N/A
Probe Attenuation	1
Record Arm Source	No Source
Records Done	1
Reference Clock Rate	N/A
Reference Level Units	Percentage
Reference Position	50
Resolution	8
Resource Descriptor	device/session-specific
RIS Method	Exact Num Avg
RIS Num Avg	4
Sample Clock Output Terminal	N/A
Sample Clock Timebase Divisor	Real Time
Sample Clock Timebase Rate	N/A
Sample Clock Timebase Source	N/A
Sample Mode	N/A
Signal Format	N/A
Slave Trigger Delay	0
SYNCOUT Clock Select	N/A
Temperature	N/A
Test Mode Sin/Cos	N/A
Time Per Record	0.001
Trigger Coupling	DC
Trigger Delay	0
Trigger From PFI Delay	0
Trigger From RTSI Delay	0
Trigger From Star Delay	0
Trigger Holdoff	0
Trigger Hysteresis	0.25
Trigger Impedance	1000000
Trigger Level	0
Trigger Output Event	0
Trigger Output Source	No Source
Trigger Slope	Positive
Trigger Source	Immediate
Trigger To PFI Delay	0
Trigger To RTSI Delay	0
Trigger To Star Delay	0
Trigger Type	Immediate
Trigger Window High Level	0
Trigger Window Low Level	0
Trigger Window Mode	Entering
Vertical Coupling	DC
Vertical Offset	0
Vertical Range	20

previous page start next page