NI 5112 Properties and Default Values

NI-SCOPE LabVIEW

previous page next page

NI 5112 Properties and Default Values

The following table lists the property default values for NI 5112 digitizers. N/A indicates that the attribute is not supported by the device.

Property (Attribute)Default Value
Acquisition Arm Source (Start Trigger Source)Immediate
Acquisition Start Time0
Acquisition TypeNormal
Actual Record Length 1000
Actual Sample Rate 1000000
Advance Trigger SourceN/A
Arm Reference Trigger SourceN/A
Backlog0
Binary Sample Width 8
Channel Count 2
Channel Enabled 0
Class Group Capabilities IviScopeBase, IviScopeWaveformMeasurement, IviScopeSampleMode, IviScopeAutoSetup, IviScopeTVTrigger
Clock Sync Pulse Source No Source
Combined Decimation N/A
Delay Before Initiate 0
Description National Instruments High Speed Digitizers Oscilloscope Instrument Driver
Driver Prefix niScope
Driver Vendor National Instruments
Enable DC Restore N/A
Enable DDC N/A
Enable Dither N/A
Enable Records Greater Than Memory0
Enable TDCN/A
Enforce Realtime1
EventN/A
Fetch Interleaved Data 0
Fetch Meas Num Samples –1
Fetch Num Records –1
Fetch Offset 0
Fetch Record Number 0
Fetch Relative To Pretrigger
Horizontal Min Number of Points 1000
Input Clock Source No Source
Input Impedance 1000000
Interchange Check 0
Line Number N/A
Logical Name —
Manufacturer National Instruments
Master Enable 0
Max Input Frequency 100000000
Max Realtime Sampling Rate 100000000
Max RIS Rate N/A
Measurement Array Gain 1
Measurement Array Offset 0
Channel Based High Ref 90
Channel Based Low Ref 10
Channel Based Mid Ref 50
Filter Center Freq 1000000
Filter Cutoff Freq 1000000
Filter Order 2
Filter Ripple 0.1
Filter Taps 25
Percent Waveform Transient 20
Filter Type Lowpass
Filter Width 1000
FIR Window 0
Hysteresis Percent 2
Interpolation Sampling Factor 2
Last ACQ Histogram Size 256
Other Channel 0
Polynomial Interpolation Order 1
Time Histogram High Time 0.0005
Time Histogram High Volts 10
Time Histogram Low Time –0.0005
Time Histogram Low Volts–10
Time Histogram Size 256
Voltage Histogram High Volts 10
Voltage Histogram Low Volts –10
Voltage Histogram Size 256
Min Sample Rate 1000000
Model NI PXI-5112, NI PCI-5112
Channel Count 2
Output Clock Source No Source
Percentage Units Method Base Top
PLL Locked N/A
Points Done N/A
Polarity N/A
Probe Attenuation 1
Prog FIR Filter Taps N/A
Record Arm Source No Source
Records Done N/A
Reference Clock Rate N/A
Reference Level Units Percentage
Reference Position 50
Resolution 8
Resource Descriptor device/session-specific
RIS Method Exact Num Avg
RIS Num Avg 4
Sample Clock Output Terminal N/A
Sample Clock Timebase Divisor Real Time
Sample Clock Timebase Rate N/A
Sample Clock Timebase Source N/A
Sample Mode N/A
Signal Format N/A
Slave Trigger Delay 0
SYNCOUT Clock Select N/A
Temperature N/A
Test Mode Sin/Cos N/A
Time Per Record 0.001
Trigger Coupling DC
Trigger Delay 0
Trigger From PFI Delay 0
Trigger From RTSI Delay 0
Trigger From Star Delay 0
Trigger Holdoff 0
Trigger Hysteresis 0.25
Trigger Impedance 1000000
Trigger Level 0
Trigger Output Event 0
Trigger Output Source No Source
Trigger Slope Positive
Trigger Source Immediate
Trigger To PFI Delay 0
Trigger To RTSI Delay 0
Trigger To Star Delay 0
Trigger Type Immediate
Trigger Window High Level 0
Trigger Window Low Level 0
Trigger Window Mode Entering
Vertical Coupling DC
Vertical Offset 0
Vertical Range 10.39825
previous page start next page