UART1_RS485_CTRLCFG_Type Struct Reference
[UART_Public_Types]
UART1 Full modem - RS485 Control configuration type.
More...
#include <lpc17xx_uart.h>
Detailed Description
UART1 Full modem - RS485 Control configuration type.Definition at line 494 of file lpc17xx_uart.h.
Field Documentation
Auto Address Detect mode state:
- ENABLE: ENABLE this function.
- DISABLE: Disable this function.
Definition at line 501 of file lpc17xx_uart.h.
Auto Direction Control State:
- ENABLE: Enable this function.
- DISABLE: Disable this function.
Definition at line 504 of file lpc17xx_uart.h.
uint8_t DelayValue |
delay time is in periods of the baud clock, 8-bit long
Definition at line 519 of file lpc17xx_uart.h.
If direction control is enabled, state:
- UART1_RS485_DIRCTRL_RTS: pin RTS is used for direction control.
- UART1_RS485_DIRCTRL_DTR: pin DTR is used for direction control.
Definition at line 507 of file lpc17xx_uart.h.
Polarity of the direction control signal on the RTS (or DTR) pin:
- RESET: The direction control pin will be driven to logic "0" when the transmitter has data to be sent.
- SET: The direction control pin will be driven to logic "1" when the transmitter has data to be sent.
Definition at line 512 of file lpc17xx_uart.h.
uint8_t MatchAddrValue |
address match value for RS-485/EIA-485 mode, 8-bit long
Definition at line 518 of file lpc17xx_uart.h.
Normal MultiDrop mode State:
- ENABLE: Enable this function.
- DISABLE: Disable this function.
Definition at line 495 of file lpc17xx_uart.h.
Receiver State:
- ENABLE: Enable Receiver.
- DISABLE: Disable Receiver.
Definition at line 498 of file lpc17xx_uart.h.
The documentation for this struct was generated from the following file:
- C:/nxpdrv/LPC1700CMSIS/Drivers/include/lpc17xx_uart.h
Generated on Mon Feb 8 10:01:56 2010 for LPC1700CMSIS Standard Peripheral Firmware Library by 1.5.9