LPC1700CMSIS Standard Peripheral Firmware Library: ADC_Public_Types

LPC1700CMSIS

previous page next page

ADC_Public_Types
[ADC]


Defines

#define PARAM_ADC_TYPE_INT_OPT(OPT)
#define PARAM_ADC_TYPE_INT_OPT(OPT)
#define PARAM_ADC_START_ON_EDGE_OPT(OPT)   ((OPT == ADC_START_ON_RISING)||(OPT == ADC_START_ON_FALLING))
#define PARAM_ADC_DATA_STATUS(OPT)   ((OPT== ADC_DATA_BURST)||(OPT== ADC_DATA_DONE))
#define PARAM_ADC_FREQUENCY(FRE)   (FRE <= 13000000 )
#define PARAM_ADC_CHANNEL_SELECTION(SEL)
#define PARAM_ADC_START_OPT(OPT)
#define PARAM_ADCx(n)   (((uint32_t *)n)==((uint32_t *)LPC_ADC))

Enumerations

enum  ADC_CHANNEL_SELECTION {
  ADC_CHANNEL_0 = 0, ADC_CHANNEL_1, ADC_CHANNEL_2, ADC_CHANNEL_3,
  ADC_CHANNEL_4, ADC_CHANNEL_5, ADC_CHANNEL_6, ADC_CHANNEL_7
}
 ADC enumeration. More...
enum  ADC_START_OPT {
  ADC_START_CONTINUOUS = 0, ADC_START_NOW, ADC_START_ON_EINT0, ADC_START_ON_CAP01,
  ADC_START_ON_MAT01, ADC_START_ON_MAT03, ADC_START_ON_MAT10, ADC_START_ON_MAT11
}
 Type of start option. More...
enum  ADC_START_ON_EDGE_OPT { ADC_START_ON_RISING = 0, ADC_START_ON_FALLING }
 Type of edge when start conversion on the selected CAP/MAT signal. More...
enum  ADC_TYPE_INT_OPT {
  ADC_ADINTEN0 = 0, ADC_ADINTEN1, ADC_ADINTEN2, ADC_ADINTEN3,
  ADC_ADINTEN4, ADC_ADINTEN5, ADC_ADINTEN6, ADC_ADINTEN7,
  ADC_ADGINTEN
}
 * ADC type interrupt enum More...
enum  ADC_DATA_STATUS { ADC_DATA_BURST = 0, ADC_DATA_DONE }
 ADC Data status. More...

Define Documentation

#define PARAM_ADC_CHANNEL_SELECTION ( SEL   ) 

Value:

((SEL == ADC_CHANNEL_0)||(ADC_CHANNEL_1)\
||(SEL == ADC_CHANNEL_2)|(ADC_CHANNEL_3)\
||(SEL == ADC_CHANNEL_4)||(ADC_CHANNEL_5)\
||(SEL == ADC_CHANNEL_6)||(ADC_CHANNEL_7))

Definition at line 241 of file lpc17xx_adc.h.

#define PARAM_ADC_DATA_STATUS ( OPT   )     ((OPT== ADC_DATA_BURST)||(OPT== ADC_DATA_DONE))

Definition at line 237 of file lpc17xx_adc.h.

#define PARAM_ADC_FREQUENCY ( FRE   )     (FRE <= 13000000 )

Definition at line 239 of file lpc17xx_adc.h.

#define PARAM_ADC_START_ON_EDGE_OPT ( OPT   )     ((OPT == ADC_START_ON_RISING)||(OPT == ADC_START_ON_FALLING))

Definition at line 235 of file lpc17xx_adc.h.

#define PARAM_ADC_START_OPT ( OPT   ) 

Value:

((OPT == ADC_START_CONTINUOUS)||(OPT == ADC_START_NOW)\
||(OPT == ADC_START_ON_EINT0)||(OPT == ADC_START_ON_CAP01)\
||(OPT == ADC_START_ON_MAT01)||(OPT == ADC_START_ON_MAT03)\
||(OPT == ADC_START_ON_MAT10)||(OPT == ADC_START_ON_MAT11))

Definition at line 246 of file lpc17xx_adc.h.

#define PARAM_ADC_TYPE_INT_OPT ( OPT   ) 

Value:

((OPT == ADC_ADINTEN0)||(OPT == ADC_ADINTEN1)\
||(OPT == ADC_ADINTEN2)||(OPT == ADC_ADINTEN3)\
||(OPT == ADC_ADINTEN4)||(OPT == ADC_ADINTEN5)\
||(OPT == ADC_ADINTEN6)||(OPT == ADC_ADINTEN7)\
||(OPT == ADC_ADGINTEN))
Macro to determine if it is valid interrupt type

Definition at line 251 of file lpc17xx_adc.h.

#define PARAM_ADC_TYPE_INT_OPT ( OPT   ) 

Value:

((OPT == ADC_ADINTEN0)||(OPT == ADC_ADINTEN1)\
||(OPT == ADC_ADINTEN2)||(OPT == ADC_ADINTEN3)\
||(OPT == ADC_ADINTEN4)||(OPT == ADC_ADINTEN5)\
||(OPT == ADC_ADINTEN6)||(OPT == ADC_ADINTEN7)\
||(OPT == ADC_ADGINTEN))
Macro to determine if it is valid interrupt type

Definition at line 251 of file lpc17xx_adc.h.

#define PARAM_ADCx ( n   )     (((uint32_t *)n)==((uint32_t *)LPC_ADC))

Definition at line 257 of file lpc17xx_adc.h.

Enumeration Type Documentation

enum ADC_CHANNEL_SELECTION

ADC enumeration.

Channel Selection

Enumerator:
ADC_CHANNEL_0  Channel 0
ADC_CHANNEL_1  Channel 1
ADC_CHANNEL_2  Channel 2
ADC_CHANNEL_3  Channel 3
ADC_CHANNEL_4  Channel 4
ADC_CHANNEL_5  Channel 5
ADC_CHANNEL_6  Channel 6
ADC_CHANNEL_7  Channel 7

Definition at line 158 of file lpc17xx_adc.h.

enum ADC_DATA_STATUS

ADC Data status.

Enumerator:
ADC_DATA_BURST 
ADC_DATA_DONE 

Definition at line 228 of file lpc17xx_adc.h.

enum ADC_START_ON_EDGE_OPT

Type of edge when start conversion on the selected CAP/MAT signal.

Enumerator:
ADC_START_ON_RISING  Start conversion on a rising edge on the selected CAP/MAT signal
ADC_START_ON_FALLING  Start conversion on a falling edge on the selected CAP/MAT signal

Definition at line 197 of file lpc17xx_adc.h.

enum ADC_START_OPT

Type of start option.

Type of start option

Enumerator:
ADC_START_CONTINUOUS  Continuous mode
ADC_START_NOW  Start conversion now
ADC_START_ON_EINT0  Start conversion when the edge selected by bit 27 occurs on P2.10/EINT0
ADC_START_ON_CAP01  Start conversion when the edge selected by bit 27 occurs on P1.27/CAP0.1
ADC_START_ON_MAT01  Start conversion when the edge selected by bit 27 occurs on MAT0.1
ADC_START_ON_MAT03  Start conversion when the edge selected by bit 27 occurs on MAT0.3
ADC_START_ON_MAT10  Start conversion when the edge selected by bit 27 occurs on MAT1.0
ADC_START_ON_MAT11  Start conversion when the edge selected by bit 27 occurs on MAT1.1

Definition at line 176 of file lpc17xx_adc.h.

enum ADC_TYPE_INT_OPT

* ADC type interrupt enum

Enumerator:
ADC_ADINTEN0  Interrupt channel 0
ADC_ADINTEN1  Interrupt channel 1
ADC_ADINTEN2  Interrupt channel 2
ADC_ADINTEN3  Interrupt channel 3
ADC_ADINTEN4  Interrupt channel 4
ADC_ADINTEN5  Interrupt channel 5
ADC_ADINTEN6  Interrupt channel 6
ADC_ADINTEN7  Interrupt channel 7
ADC_ADGINTEN  Individual channel/global flag done generate an interrupt

Definition at line 206 of file lpc17xx_adc.h.

Generated on Mon Feb 8 10:01:42 2010 for LPC1700CMSIS Standard Peripheral Firmware Library by  doxygen 1.5.9
previous page start next page