PINSEL_CFG_Type Struct Reference
[PINSEL_Public_Types]
Pin configuration structure.
More...
#include <lpc17xx_pinsel.h>
Data Fields | |
uint8_t | Portnum |
uint8_t | Pinnum |
uint8_t | Funcnum |
uint8_t | Pinmode |
uint8_t | OpenDrain |
Detailed Description
Pin configuration structure.Definition at line 160 of file lpc17xx_pinsel.h.
Field Documentation
uint8_t Funcnum |
Function Number, should be PINSEL_FUNC_x, where x should be in range from 0 to 3
Definition at line 166 of file lpc17xx_pinsel.h.
uint8_t OpenDrain |
OpenDrain mode, should be:
- PINSEL_PINMODE_NORMAL: Pin is in the normal (not open drain) mode
- PINSEL_PINMODE_OPENDRAIN: Pin is in the open drain mode
Definition at line 172 of file lpc17xx_pinsel.h.
uint8_t Pinmode |
Pin Mode, should be:
- PINSEL_PINMODE_PULLUP: Internal pull-up resistor
- PINSEL_PINMODE_TRISTATE: Tri-state
- PINSEL_PINMODE_PULLDOWN: Internal pull-down resistor
Definition at line 168 of file lpc17xx_pinsel.h.
uint8_t Pinnum |
Pin Number, should be PINSEL_PIN_x, where x should be in range from 0 to 31
Definition at line 164 of file lpc17xx_pinsel.h.
uint8_t Portnum |
Port Number, should be PINSEL_PORT_x, where x should be in range from 0 to 4
Definition at line 162 of file lpc17xx_pinsel.h.
The documentation for this struct was generated from the following file:
- C:/nxpdrv/LPC1700CMSIS/Drivers/include/lpc17xx_pinsel.h
Generated on Mon Feb 8 10:01:55 2010 for LPC1700CMSIS Standard Peripheral Firmware Library by 1.5.9