IncrementRotationY Method
Changes the rotation of the specified shape around the y-axis by the specified number of degrees. Use the RotationY property to set the absolute rotation of the shape around the y-axis.
expression.IncrementRotationY(Increment)
expression Required. An expression that returns a ThreeDFormat object.
Increment Required Single. Specifies how much (in degrees) the rotation of the shape around the y-axis is to be changed. Can be a value from – 90 through 90. A positive value tilts the shape to the left; a negative value tilts it to the right.
Remarks
To change the rotation of a shape around the x-axis, use the IncrementRotationX method. To change the rotation around the z-axis, use the IncrementRotation method.
You cannot adjust the rotation around the y-axis of the specified shape past the upper or lower limit for the RotationY property (90 degrees to – 90 degrees). For example, if the RotationY property is initially set to 80 and you specify 40 for the Increment argument, the resulting rotation will be 90 (the upper limit for the RotationY property) instead of 120.
Example
This example tilts the first shape on the active document 10 degrees to the right. The first shape must be an extruded shape for you to see the effect of this code.
ActiveDocument.Shapes(1).ThreeD.IncrementRotationY -10