CWIMAQMeterArc
CWIMAQMeterArc object describes the arc that a meter sweeps. It contains information that the ReadMeter method uses.
Methods
| CreateFromLines | Calibrates the meter or gauge using the initial and the full-scale position of the needle. This method calculates the position of the base of the needle and the arc traced by the tip of the needle. |
| CreateFromPoints | Calibrates the meter or gauge using three points on the meter: the base of the needle, the tip of the needle at its initial position, and the tip of the needle at its full-scale position. This method calculates the position of the points along the arc covered by the tip of the needle. |