CWIMAQColor
CWIMAQColor contains parameters specifying the result of a color acquisition.
Properties
| AverageCount | Number of color images to acquire and average for one output image. You can acquire 1 to 128 color images. The default number is 1. |
| Brightness | Brightness of an image. Brightness is the amount of white light added to or subtracted from each image pixel. The range is –50 to +50 IRE in steps of 1, with a default of 0 IRE. IRE is the percentage of the white level. |
| ChromaBandwidth | Resulting bandwidth of the chroma information of the image. |
| ChromaComb | Type of comb filter to use in the chroma path. |
| ChromaPhase | Value, in degrees, of a correction angle that you can apply to the chroma vector. This value is an adjustment of the tint. |
| ChromaProcess | Processing applied to the chroma signal. |
| ChromaTrap | Chroma trap filter in the luma signal path. Always disable this property in S-Video (Y/C) mode. |
| Contrast | Contrast of the image. This value is a scaling factor applied to every pixel. The contrast adjustment is centered around the median pixel value. For example, an 8-bit image is centered around 128. The range is 0.5 to 1.5 with a default of 1.00. |
| Gain | Hardware gain of the image acquisition device. |
| HSLCoringLevel | HSL coring level, if the image representation is HSL. |
| HueCoringReplaceValue | 8-bit value that replaces the calculated hue when the saturation is below the value of HSLCoringLevel. |
| HueOffsetAngle | Offset angle, in degrees, the method uses to rotate the hue plane. |
| LumaBandwidth | Bandwidth for the Luminance signal. |
| LumaComb | Type of comb filter used in the luma path. |
| NTSCSetupEnable | Enables a setup, or pedestal, correction of 7.5 IRE in NTSC mode. |
| NTSCSetupValue | NTSC setup compensation value. |
| PeakingEnable | Peaking filter in the luma path. |
| RGBCoringLevel | RGB coring level. |
| Saturation | Saturation of the image—a factor multiplied by the chroma information of the image. The range is 0.5 to 1.5 with a default of 1.00. |
| SoftwareChromaFilter | Software filter to clean the chroma signal. |