Standard Function Output:DC Offset

Short Name: DC Offset

This property controls the DC offset of the standard waveform that the signal generator will produce. This value is the offset at the output terminal. The value is the offset from ground to the center of the waveform you specify with the Waveform property.

For example, to configure a waveform with an amplitude of 10.00 volts to range from 0.00 volts to +10.00 volts, set the DC Offset to 5.00 volts.

Default Value: None

Units: Volts (V)

Remarks

The following table lists the characteristics of this property.