Parameters
Here appear the parameters of the current custom measurement as they have been set them in the Library.
Enter for each parameter the values you want or leave the predefined ones.
The … mark at the end of the
value field signifies that the values of the parameters can be entered either by
marking them on the drawing or by typing them in (See General/Library/Custom
Measurements). During defining it on the drawing, you can form
one or more line segments. When finished press ESC
to add all these lengths and store the result in the parameter. The values of
the rest of the parameters can be left with their default, or can be assigned a
new value.
If you have created more than one
sub-measurements, the value of its parameters can be different for each one (See
Drawings/Continue
measurement). You can edit these
values separately for each sub-measurement (See Drawings/Edit
measurement). In case the parameter
can be defined on the drawing, instead of typing its new value, you can edit it
by clicking on the …
sign and repeating the aforementioned procedure. Note that when doing so, you
have to define all line segments from the beginning, as the previous value is
not retained.
Parameters that are
defined on the drawing are marked in a similar way to the dimension objects in a
CAD program. You can modify them by dragging and dropping the nodes of the
corresponding line segments. The value of the parameter and ultimately the
measurement will be automatically renewed.