---

Checking memory is blank

---

To blank check memory:

1. Make sure that the ST microcontroller is plugged into the hardware programming tool socket.
2. Make sure that the hardware is correctly configured, follow the instructions given in Configuring STVP.
3. To blank check EPROM memory area, click on Current tab in the Blank-Check menu.
   To blank check one or more FLASH sector(s):
1. Select the sector(s) to be blank-checked in the Flash sector area.
2. Click on Active sector(s) in the Blank-Check menu.
4. The blank check result is displayed in the Output window.



---