Erase FLASH memory sectors

To erase FLASH memory sectors:

1. Make sure that the ST microcontroller is plugged into the programming socket.
2. Make sure that STVP is correctly configured for the ST microcontroller by following the instructions given in Configuring ST Visual Programmer.
3. In the STVP main window, click on the PROGRAM MEMORY tab.
4. For Program memory only: to erase one (or more) FLASH memory sector(s):
1. In the Flash sector area click the check box(es) corresponding to the sector(s) you want to erase.
2. Click on Active Sector(s) in the Erase menu (or press the button).
3. Click on OK.

---