You can use the LabVIEW Digital Filter Design Toolkit to execute a digital filter on many different types of targets. The following table shows the supported target types and any additional software you must install to execute a digital filter on that type of target.
Type of Target
Additional Required Software
A Windows PC
—
A National Instruments field-programmable gate array (FPGA) target, such as an NI Reconfigurable I/O (NI-RIO) device. To use a digital filter on an FPGA target, you first must generate FPGA code for that filter.
LabVIEW FPGA Module
NI-RIO driver software
A 32-bit microprocessor. To use a digital filter on a 32-bit microprocessor, you first must generate fixed-point C code for that filter.
LabVIEW with embedded target support
The LabVIEW add-on for the embedded target
An NI Real-Time (RT) target, such as an NI PXI or CompactRIO controller, running the Ardence Phar Lap Embedded Tool Suite (ETS) or Wind River VxWorks real-time operating system (RTOS). The Digital Filter Design VIs support native execution on these operating systems.
LabVIEW Real-Time Module
Driver software for any hardware devices
Note Refer to the National Instruments Web site for information about the National Instruments products this table mentions.
