In this exercise, you will change the actual elevation to a fixed elevation for inserted points.

1. On the Points menu, click Point Settings to display the Point Settings dialog box.

2. Click the Insert tab. In the Insertion Elevation section, select Fixed elevation, verify that the Fixed elevation is 0 (zero) m.

3. Click the Text tab. Select the Automatic Leaders check box and then click OK.

   Use the following step to list information about the existing point elevation.

4. Enter LIST, and then select point number 758 and press ENTER.

   The Marker Location still lists the elevation as 245.51 m. The point setting just made does not alter existing points in the drawing. You must reinsert or edit the point to implement the elevation change.

5. Close the text window.

   Use the following steps to reinsert the points in this area back into the drawing.

6. On the Points menu, click Insert Points to Drawing, and then press ENTER to accept the default, Window, and window in the two points.

7. As the Point in Drawing dialog box is displayed, click Replace All.

8. Enter LIST, and then select point number 758 and press ENTER.

   The Marker Location lists the elevation as 0 m.

9. Close the text window.