In this exercise, you will continue placing points with automatic elevations and descriptions.

1. On the Points menu, click Point Settings to display the Point Settings dialog box.

2. On the Create tab, in the Elevations section, select Automatic.

3. In the Descriptions section, select Automatic, and then click OK.

   Use the following steps to place a point at the upper-left building corner at an elevation of 249 m and with a description of BLDG.

4. On the Points menu, click Create Points Manual.

5. Use an Endpoint Osnap to select the upper-left building corner, and then press ENTER.

The point is placed at an elevation of 249 m and with a description of BLDG automatically.

Click here to see an illustration of the third point.