In this exercise, you will look at some of the point display properties.
Select point number 758, right-click and click Display Properties to display the Point Display Properties dialog box.
Click the Reset tab. In the Point Elevation section, select the Reset Point Elevation in Drawing check box, select Actual Elevation, and then click OK.
Enter LIST, and then select both points and press ENTER.
For point number 758, observe that the Marker Location lists the elevation as 245.51 m. For point number 247, the Marker Location lists the elevation as 0 m. Changes made in the Display Properties dialog box take immediate effect, without having to reinsert the points in the drawing.
Close the text window.