AcMap::EErrCode enumerators represent error codes.
Errors on the error stack are represented by AcMapErrorEntry objects. Error codes are returned by the AcMapErrorEntry::ErrorCode function.
| 1200 |
kErrQueriedEntity |
Ignoring queried entity for saving selection. When using ADESAVEOBJS, the message means queried objects that are selected for save back are ignored. |
| 1201 |
kErrDwgNotActive |
Attempt to read the object locked from an inactive drawing. When using ADEWHOHASIT, the message means the drawing from which the object was queried is no longer active. ADE is unable to determine if the object selected is currently locked. Activate the specified drawing and reentert the command. |
| 1202 |
kErrReadDwgFileFails |
ADE fails to read external drawing. If using ADEDRAWINGS, this message means that ADE is unable to read the specified drawing. Perhaps the drawing doesn't exit or the specified file is not a valid AutoCAD Drawing File. Check the error message stack for more information. |
| 1203 |
kErrMultipleUsers |
ADE fails to access external drawing.. If using ADEDRAWINGS, this message means ADE is unable to access the specified drawing because of file locking problems. Check the error message stack for more information. |
| 1204 |
kErrEntityLockingFails |
ADE fails to lock. If using ADESELOBJS, this message means ADE is unable to lock an object. The object may already be locked. Use the ADEWHOHASIT to determine if the object is locked, perhaps by another user. Check the error message stack for more information. |
| 1205 |
kErrUnlockedEntity |
Entity is unlocked by another ADE user. If using ADEWHOHASIT, this message indicates that the selected object is not currently locked. |
| 1206 |
kErrLockedEntity |
Entity has been locked by another ADE user. If using ADESELOBJS, this message indicates that the object is already locked by another user. Use the ADEWHOHASIT command to identify the user. |
| 1207 |
kErrAlreadyInSaveSet |
|
| 1208 |
kErrAlreadyNotInSaveSet |
|
| 1209 |
kErrMultipleReaders |
|
| 1210 |
kErrOpenPrefDictionaryFails |
ADE fails to open ADE preferences dictionary. Call support. |
| 1211 |
kErrSavePrefDictionaryFails |
ADE fails to save ADE preferences dictionary. Call support. |
| 1212 |
kErrRestoreDSetFails |
ADE fails to restore the drawing set. Call support. |
| 1213 |
kErrOpenDSetDictionaryFails |
ADE fails to open ADE drawing set dictionary. Call support. |
| 1214 |
kErrSaveDSetDictionaryFails |
ADE fails to save ADE drawing set in dictionary. Call support. |
| 1215 |
kErrOpenQueryDictionaryFails |
ADE fails to open ADE query library dictionary. Call support. |
| 1216 |
kErrSaveQueryDictionaryFails |
ADE fails to save ADE query library in dictionary. Call support. |
| 1217 |
kErrOpenRTableDictionaryFails |
ADE fails to open ADE range table dictionary. Call support. |
| 1218 |
kErrSaveRTableDictionaryFails |
ADE fails to save ADE range table in dictionary. Call support. |
| 1219 |
kErrRestoreRTableDictionaryFails |
ADE fails to restore ADE range table in dictionary. Call support. |
| 1220 |
kErrOpenDocViewDictionaryFails |
ADE fails to open ADE Doc View information dictionary. Call support. |
| 1221 |
kErrSaveDocViewDictionaryFails |
ADE fails to save ADE Doc View information in dictionary. Call support. |
| 1222 |
kErrOpenKeyViewDictionaryFails |
ADE fails to open ADE Key View information dictionary. |
| 1223 |
kErrSaveKeyViewDictionaryFails |
ADE fails to save ADE Key View information in dictionary. Call support. |
| 1224 |
kErrSaveProjectionFails |
ADE fails to save projection code in the drawing. Call support. |
| 1225 |
kErrCopyHardPointerFails |
ADE fails to apply property alteration for some symbol table. Call support. |
| 1226 |
kErrDwgToBeReloaded |
|
| 1227 |
kErrDwgHasBeenModified |
There were objects queried from the drawing that will be treated as new objects. If using ADEDRAWINGS, this message means that when a drawing from which objects have been queried is detached, ADE converts the objects into newly created objects. When you use the ADEWHOHASIT command to see the origin of these objects, it says that they have not been queried. |
| 1228 |
kErrOnLockedLayer |
Objects from a locked layer have been selected. If using ADESELOBJS, ADEREMOBJS, or ADESAVEOBJS, this message means you selected objects from a locked layer and they cannot be added to, saved to. or removed from the the save set or saved to source. |
| 1229 |
kErrDwgSaveFales |
ADE fails to save the source drawing. If using ADESAVEOBJS, ADESELOBJS, ADEREMOBJS, OPEN, NEW, or QUIT, or if you're configuring options, or modifying objects, you may get this message. Call support. NOTE: Use this message exactly as spelled here. |
| 1230 |
kErrDwgLocksLeft |
ADE fails to remove object locks (if present) by the end of ADE session. If using OPEN, NEW, or QUIT, or if you're configuring options, this message means the drawing might be locked by another ADE user. |
| 1231 |
kErrLinkWillBeLost |
ADE does not save links between queried objects and source drawings between ADE sessions. Detach source drawing with queried objects; Use the SAVE command with queried objects or no objects in the save set. |
| 1232 |
kErrDwgDiskFull |
|
| 1233 |
kErrDwgHasQueriedObject |
|
| 1234 |
kErrUnlockedFile |
|
| 1300 |
kErrGetCPointFails |
ADE fails to get Text location for the entity. Call support. |
| 1301 |
kErrSetCPointFails |
ADE fails to store Text location for the entity. Call support. |
| 1302 |
kErrTextInsPointMissed |
Missing Text insert point. Call support. |
| 1303 |
kErrTextAllignPointMissed |
Missing alignment point for Aligned and Fit Text. Call support. |
| 1304 |
kErrTextHeightMissed |
Missing Text height. Call support. |
| 1305 |
kErrTextStringMissed |
Missing Text string. Call support. |
| 1306 |
kErrIndexUpdateFails |
Exception in Index generation or regeneration. If using ADESAVEOBJS, ADESELOBJS, ADEREMOBJS, or ADEDWGMAINT, this message means entity modification occurred. Call support. |
| 1307 |
kErrIgnorePreview |
ADE custom object is selected to add to save set or to save. If using ADESAVEOBJS, ADESELOBJS, or ADEREMOBJS this message has the following meaning: When doing a Preview Query, ADE creates a special object called a PREVIEW object, used to display the queried objects. PREVIEW cannot be saved back to a source drawing. When a user selects this object for adding to the save set or when saving back, ADE detects this and prevents the operation. |
| 1308 |
kErrIgnorePSpace |
|
| 1309 |
kErrEraseIRDObjectFails |
ADE fails to erase the Object Data Table. Call support. |
| 1310 |
kErrRenameIRDObjectFails |
ADE fails to rename the Object Data Table. Call support. If using ADEDEFDATA, this message means ADE can't rename Object Data Table. Perhaps Object Data of the same name already exists in the drawing or Object Data Table definitions bearing the old name are different in the source drawings. Check the error message for more information. |
| 1311 |
kErrAlterIRDObjectFails |
ADE fails to alter Object Data Table. If using ADEDEFDATA, this message means ADE can't alter Object Data Table. Perhaps Object Data Table definitions are different in the source drawings. Check the error message stack for more information. |
| 1312 |
kErrIrdDuplicateTableName |
Object Data Table with specified name already exists. ADEDEFDATA - all Object Data table names must be unique. Duplicate names are not allowed. |
| 1313 |
kErrIrdNotIdenticaFormat |
Conflict in Object Data Table definition. If using ADEDEFDATA, this message means that perhaps Object Data Table definitions are different in the source drawings. NOTE: Use this message exactly as spelled here. |
| 1314 |
kErrBHatchUnit |
ADE treats bhatch and its boundary as one unit. If using ADESELOBJS or ADEREMOBJS, this message has the following meaning: When adding an object to the save set, ADE checks if this object is part of a hatch boundary. If it is, all other objects that form the boundary are added to or removed from the save set. When saving back bhatched areas, ADE always treats the boundary as one object. |
| 1315 |
kErrReQuery |
ADE queried one or more objects twice. ADE does not support UNDO for this operation. If using ADEQUERY or ADERUNXQUERY this message has the following meaning: If a drawing file has been modified by another ADE user and if a queried object matches another query, ADE removes the old copy and queries a new copy. This operation can't be undone. |
| 1316 |
kErrCantAccessFont |
|
| 1317 |
kErrCantAccessImageFile |
|
| 1318 |
kErrUnableRedefineXrefBlock |
|
| 1500 |
kErrRestoreDrawingSetFails |
ADE fails to read Drawing Set from DWG file. You encounter this message during ADE initialization or when using Open drawing file or ADEDRAWINGS. If using ADEDRAWINGS - attach drawing, the message means"activate on attach" is ON or ade_dsattach(), ade_dswcattach() drawing is corrupted or old ADE version is in use. |
| 1501 |
kErrDuplicatedDrawing |
Attempt to attach the same drawing twice. If using ADEDRAWINGS, this error appears when a drawing with the same name has already been attached to the work session. |
| 1502 |
kErrNestedDrawing |
Prohibited attempt to edit properties of the drawing in the nested drawing set. If using ADEDRAWINGS, this message means a user is not allowed to modify the transformation and save back extents of nested drawings in the work session. These properties can only be modified for top level drawings. |
| 1503 |
kErrActivateDrawingFails |
ADE fails to activate source drawing. ADE was unable to activate a drawing Perhaps the drawing does not exist or it is locked by another user, or the current user doesn't have permission to read the specified drawing file. Check the error message stack for more information. |
| 1504 |
kErrDeactivateDrawingFails |
ADE fails to deactivate source drawing. ADE is unable to deactivate a drawing. Perhaps the drawing is locked by another user, the drawing no longer exists, or there are locked objects in the drawing. Check the error message stack for more information. |
| 1505 |
kErrLongDrawingDescription |
Specified drawing description exceeds 133 symbols. Shorten description. |
| 1506 |
kErrEntityHasBeenLocked |
Drawing with locked entities can't be deactivated. ADEDRAWINGS - the specified drawing cannot be deactivated because it contains locked objects. Remove locks and deactivate. |
| 1507 |
kErrPreviewNotSupported |
ADE 2.0 ignoresTolerance, Body,Ellipse, 3dSolid, Region and Mline. If using ADEQUERY (Preview), ADEQVIEWDWGS, or ADEKEYVIEW, this message means ADE does not support Preview Query of Tolerance, Body,Ellipse, 3dSolid, Region and Mline. |
| 1508 |
kErrAliasIsInUse |
A drive alias of the same name already exists. |
| 1509 |
kErrActivateDrawingCancelled |
AcMapDrawingSetReactor::DrawingToBeActivated returns Adesk::kFalse, the attach operation
is cancelled, and the error is returned to the application to handle. |
| 1510 |
kErrAttachDrawingCancelled |
AcMapDrawingSetReactor::DrawingToBeAttached returns Adesk::kFalse, the attach operation
is cancelled, and the error is returned to the application to handle. |
| 1900 |
kErrMapCoincPoint |
Coincident points. If using ADERSHEET or ADETRANSFORM this message means either old or new points are coincident. They must be different. |
| 1901 |
kErrMapWrongScale |
Invalid scale. Call support. |
| 1902 |
kErrMapTransform |
Can't transform entity. ADERSHEET, ADETRANSFORM, ADEQUERY, ADESAVEOBJS An error appeared at the time of entity transformation. It is high-level error. There must be another error in the stack with more specific information. |
| 1903 |
kErrMapWrongExtents |
Invalid entity extents. If you're using ADETEXTLOC, ADERSHEET, ADEQUERY, ADESAVEOBJS, or calling AcDbEntity::getGeomExtents() function you may get this message. |
| 1904 |
kErrMapWrongPoints |
Invalid points number. If you're using ADERSHEET, this message means that the numbers of old and new points are different, or less than 2. Dialog doesn't allow this. C. |
| 1905 |
kErrMapWrongSelSet |
Invalid selection set. Call support. |
| 1906 |
kErrMapWrongEntityName |
Invalid entity name. The entity is open. For example, it has been received from the API. |
| 1907 |
kErrMapOpenEntity |
Can't open entity. The entity is open. For example, another application opened the entity. |
| 1908 |
kErrMapUpgradeEntity |
Can't upgrade open. Entity modification occured. |
| 1909 |
kErrMapMoveStretchPoints |
Can't modify stretch points. Call support. |
| 1910 |
kErrMapEntityPoint |
Can't modify entity points. Call support. |
| 1911 |
kErrMapCmdecho |
Can't change CMDECHO variable. Using ADEFILLPOLYG may produce this message. |
| 1912 |
kErrMapCecolor |
Can't change CECOLOR variable. Using ADEFILLPOLYG may produce this message. |
| 1913 |
kErrMapHatch |
Error in hatch command. Using ADEFILLPOLYG may produce this message. |
| 1914 |
kErrMapWrongIntersectForPoints |
Can't find intersection. Using ADEQUERY or calling AcDbentity::IntersectWith() function may produce this message. |
| 1915 |
kErrMapWrongHandle |
Wrong entity handle. Call support. |
| 1916 |
kErrMapNotPolyline |
Entity isn't polyline. Call support. |
| 1917 |
kErrMapIterator |
Can't create iterator. Call support. |
| 1918 |
kErrMapWriteXData |
Can't write Xdata. Ensure that Xdata size is 16 KB or less. |
| 1919 |
kErrMapBuffer |
Can't create buffer. If you're using ADEQUERY, to make a location query using a bufferfence, you may get this message. |
| 1920 |
kErrMapStretchPoints |
Can't get stretch points. If you're using ADETRANSFORM or ADEQUERY or calling AcDbEntity::getStretchPoints() you may get this message. |
| 2000 |
kErrTopInvalidName |
Invalid topology name. Occurs during topology creation. |
| 2001 |
kErrTopExist |
Topology already exists. Occurs during topology creation. |
| 2002 |
kErrTopBuildNet |
Error building network topology. Occurs during topology creation. |
| 2003 |
kErrTopBuildPolygon |
Error building polygon topology. Occurs during topology creation. |
| 2004 |
kErrTopBuildNode |
Can't create node. Occurs during topology creation. |
| 2005 |
kErrTopBuildArc |
Can't create link. Occurs during topology creation. |
| 2006 |
kErrTopBuildCntr |
Can't create centroid. Occurs during topology creation. |
| 2007 |
kErrTopAPIReg |
Can't register topology API. Occurs during ADE loading. |
| 2008 |
kErrTopFuncNotAvail |
Function isn't available. Occurs if you're using topology functions of the API. |
| 2009 |
kErrTopWriteData |
Error writing Xdata. Occurs during topology creation and modification. |
| 2010 |
kErrTopNotExist |
Topology doesn't exist. Occurs if you're using topology functions of the API. |
| 2011 |
kErrTopOverlayType |
Wrong overlay type. |
| 2012 |
kErrTopMakeLayer |
Can't create new layer. Using ADEDWGCLEAN produces this message. |
| 2013 |
kErrTopBlockNotExist |
Block doesn't exist. |
| 2014 |
kErrTopNotOpenForWrite |
Topology isn't open for write. Occurs when editing topology. |
| 2015 |
kErrTopOpenIrdTable |
Can't open object data table. Occurs when loading and editing topology. |
| 2016 |
kErrTopWrongIrdAttr |
Invalid object data table. Occurs when loading and editing topology. |
| 2017 |
kErrTopLoaded |
Topology is already loaded. Occurs when loading topology. |
| 2018 |
kErrTopIncompleteElem |
Incomplete toplogical element. Occurs when editing topology. |
| 2019 |
kErrTopInvalidColor |
Invalid color number. Occurs when using ADEDWGCLEAN and creating topology. |
| 2020 |
kErrTopInvalidFlag |
Invalid flag. Occurs when using ADEDWGCLEAN. |
| 2021 |
kErrTopInvalidTolerance |
Invalid tolerance. Occurs when using ADEDWGCLEAN and creating topology. |
| 2022 |
kErrTopInvalidCorridor |
Invalid corridor width. Occurs when using ADEDWGCLEAN. |
| 2023 |
kErrTopInvalidOffset |
Invalid offset. Occurs when using buffering. |
| 2024 |
kErrTopInvalidHeight |
Invalid marker height. Occurs when using ADEDWGCLEAN. |
| 2025 |
kErrTopInvalidMarkerType |
Invalid marker type. Occurs when using ADEDWGCLEAN. |
| 2026 |
kErrTopInvalidEntityType |
Invalid type for new entities. Occurs when using ADEDWGCLEAN. |
| 2027 |
kErrTopInvalidErrorType |
Invalid error type. Occurs when using ADEDWGCLEAN. |
| 2028 |
kErrTopIntersection |
Intersections detected. Occurs when creating and editing polygon topology. |
| 2029 |
kErrTopOverlayItself |
Can't overlay topology with itself. |
| 2030 |
kErrTopSourceDwgAccess |
Can't access source drawing. |
| 2031 |
kErrTopSourceDwgNotActive |
Source drawing isn't active. |
| 2032 |
kErrTopSourceDatabaseAccess |
Can't access source drawing database. |
| 2033 |
kErrTopSourceObjectId |
Can't get object ID by handle in source drawing database. |
| 2034 |
kErrTopNotLoaded |
Topology isn't loaded. |
| 2035 |
kErrTopImplicitNode |
Node object doesn't exist in node topology. |
| 2036 |
kErrTopMisplacedNode |
Wrong node coordinates. |
| 2037 |
kErrTopUnreferencedNode |
Node isn't referenced in links. |
| 2038 |
kErrTopUnexistentNode |
Link references nonexistent node. |
| 2039 |
kErrTopMismatchStartNode |
Link has invalid ID at the start node. |
| 2040 |
kErrTopMismatchEndNode |
Link has invalid ID at the end node. |
| 2041 |
kErrTopMisplacedCentroid |
Wrong centroid coordinates. |
| 2042 |
kErrTopMismatchLeftPoly |
Link has invalid ID for the left polygon. |
| 2043 |
kErrTopMismatchRightPoly |
Link has invalid ID for the right polygon. |
| 2044 |
kErrTopUnexistentCentroid |
Centroid isn't inside polygon. |
| 2045 |
kErrTopMultiplyCentroid |
Polygon has several centroids inside. |
| 2046 |
kErrTopWrongPolyQty |
Some polygons are incorrect. |
| 2047 |
kErrTopMismatchPolyArea |
Incorrect polygon area. |
| 2048 |
kErrTopMismatchPolyPerimeter |
Incorrect polygon perimeter. |
| 2049 |
kErrTopOpenSourceDwgTopo |
Topology loaded from source drawings can't be open for write. |
| 2050 |
kErrTopOpenTempTopo |
Temporary topology can't be open for write. |
| 2051 |
kErrTopIdNotExist |
Current drawing doesn't have OD table with information about last ID. |
| 2052 |
kErrTopEmpty |
Can't create or load empty topology. |
| 2053 |
kErrTopWasModified |
Topological objects were modified by AutoCAD commands. |
| 2054 |
kErrTopMultiple |
Object belongs to multiple topologies and can't be erased. |
| 2055 |
kErrTopCalculateOffset |
Can't calculate offset. Use default. Occurs when using buffering. |
| 2056 |
kErrTopZeroOffset |
Zero offset. Can't build buffer. |
| 2057 |
kErrTopDifferentOffset |
Offset has different sign for some objects. Can't build buffer. |
| 2058 |
kErrTopInvalidSelSet |
Invalid selection set. Occurs when using the API. |
| 2059 |
kErrTopCleanNotInit |
Cleadup model isn't initialized. Occurs when using the API. |
| 2060 |
kErrTopCleanNoGroup |
There is no current group. Occurs when using the API. |
| 2061 |
kErrTopCleanInvalidIndex |
Invalid error index. Occurs when using the API. |
| 2062 |
kErrTopCleanNoError |
Current error isn't set. Occurs when using the API. |
| 2063 |
kErrTopTraceLinkNotExist |
Link doesn't exist in tracing model. Occurs when using the API. |
| 2064 |
kErrTopTraceNodeNotExist |
Node doesn't exist in tracing model. Occurs when using the API. |
| 2065 |
kErrTopTraceNoPath |
Result path isn't calculated. Occurs when using the API. |
| 2066 |
kErrTopTraceInvalidIndex |
Invalid element index. Occurs when using the API. |
| 2067 |
kErrTopInvalidExpression |
Can't process ADE expression. Occurs when using overlay, buffer, dissolve, or tracing command. |
| 2068 |
kErrTopLockedTable |
Can't write into topology OD table. Occurs when using dissolve command. |
| 2069 |
kErrTopCreateTable |
Can't create OD table. Occurs when using topology creation, overlay, buffer, or dissolve commands. |
| 2070 |
kErrTopCreateTableColumn |
Can't add column to OD table. Occurs when using topology creation, overlay, buffer, or dissolve commands. |
| 2071 |
kErrTopTraceNodesEqual |
Start and end nodes are the same. Occurs doing shortest path tracing. |
| 2072 |
kErrTopTracePathNotExist |
Empty path. Occurs during shortest path tracing. |
| 2073 |
kErrTopTraceFloodNotExist |
Empty path. Occurs when tracing floods. |
| 2074 |
kErrTopRenameDisabled |
Can't rename topology, because current drawing has queried objects with OD. |
| 2075 |
kErrTopDeleteDisabled |
Can't delete topology, because current drawing has queried objects with OD. |
| 2076 |
kErrTopInvalidExtents |
|
| 2200 |
kErrUnexpectedBuffChar |
Invalid character encountered while reading the query definition from the drawing. Options are a) Recover the drawing b) Define and save a new query definition in the drawing. |
| 2201 |
kErrInvalidIndex |
An invalid line number was specified for either grouping or ungrouping of query lines. Specify the correct line number for grouping or ungrouping the lines. |
| 2202 |
kErrInvalidQueryLine |
One or more query lines have been incorrectly defined. May occur when you incorrectly place a parenthesis or an operator in a query line. |
| 2203 |
kErrInvalidName |
Either a query or a query category name is invalid. Ensure that the query or category name conform to the AutoCAd symbol name specifications. |
| 2204 |
kErrEntryAlreadyExists |
Either the query or the query category name already exists in the query library. Ensure that the query name is unique within the query library. |
| 2205 |
kErrEntryInOtherCategory |
The query name specified already exists in another category in the query library. Ensure that the query name is unique within the query library. |
| 2206 |
kErrEntryAndFileAlreadyExist |
The file name specified for saving the external query already exists. Choose a different file name. |
| 2207 |
kErrASIConnectFailed |
The connection to the ASI environment required for the SQL query was not made. Use ASE to connect to the environment before attempting to perform the SQL query. |
| 2208 |
kErrASIStmtPrepareFailed |
The call to CAsiExecStm:: Prepare failed. correct the table name or the SQL statement specified. |
| 2209 |
kErrASICsrAllocFailed |
The call to CAsiCsr::Allocate failed. Look at the ASI error displayed. |
| 2210 |
kErrASICsrOpenFailed |
The call to CAsiCsr::Open failed. Look at the ASI error displayed. |
| 2211 |
kErrInvalidDOName |
An invalid Environment, Schema or Catalog name was specified. Set the correct Environment, Catalog, and Schema names. |
| 2212 |
kErrLPInitFailed |
The call to CAseLinkPath::init failed. Look at the ASE error displayed. |
| 2213 |
kErrColNotFound |
Used for the SQL Order-by dialog now obsolete. Call support. |
| 2214 |
kErrQDefNotInTM |
The CAdeQueryDef object was not appended to the Transaction Manager. Internal error. |
| 2215 |
kErrQryDefnExists |
A query definition already exists and a new one cannot be loaded. Clear the existing query definition before loading a new one. |
| 2216 |
kErrInvalidOperator |
Invalid operator defined in query definition. The specified comparison operator is incompatible with operand types. Do not use > with the point type. Check the query definition and change either the operator or operand type. |
| 2217 |
kErrInvalidPtrnOperator |
Invalid operator defined in query definition for pattern value. If value operand is defined as pattern, only "=" comparison operator can be used. Check the query definition and change either operator or operand value. |
| 2218 |
kErrInvalidField |
Non-existent object data field specified. This error occurs when the user specifies the wrong object data field name for a table (if there is no such field in the specified table) in the query definition and executes the query. Check query definition and tables and correct the mistake. |
| 2219 |
kErrInvalidNotBranch |
|
| 2220 |
kErrInvalidBranch |
|
| 2221 |
kErrUndefinedValue |
|
| 2222 |
kErrInvalidLocationType |
|
| 2223 |
kErrCantLoadExternQuery |
|
| 3200 |
kErrDwkFileDoesNotExist |
ADE lock file is locked. Occurs when using ADEDRAWINGS and ADEQUERY commands and when ADE is running in a multi-user environment. |
| 3201 |
kErrOpenDwkFileFailed |
ADE was unable to open the .DWK lock file. Call support. |
| 3202 |
kErrFileLockedByAcad |
Attempt to remove a user who does not exist from the lock file. Call support. |
| 3203 |
kErrOldMapLockFile |
ADE was unable to create the .DWK lock file. Call support. |
| 3204 |
kErrFileIsNotDwk |
ADE tried to lock a file for write that was already locked for read. Call support. |
| 3205 |
kErrSpecifiedUserDoesNotExist |
ADE tried to lock a file for read that was already locked for write. Occurs during query operations in a multi-user environment. |
| 3206 |
kErrCreateDwkFileFailed |
ADE tried to open and read a file that was not a valid .DWK file. Call support. |
| 3207 |
kErrFileIsLockedForRead |
ADE was unable to unlock the lock file. Call support. |
| 3208 |
kErrFileIsLockedForWrite |
ADE tried to attach a file that is already open by AutoCAD. Occurs when using ADEDRAWINGS with ATTACH operations if the file is open in an AutoCAD project. |
| 3209 |
kErrInvalidLockStateSpecified |
ADE internal object is invalid. Call support. |
| 3210 |
kErrNotOwnerOfWLH |
ADE tried to remove a write lock when the user did not have a write lock. Call support. |
| 3211 |
kErrUserIsNotWriter |
|
| 3212 |
kErrUserIsNotReader |
|
| 3213 |
kErrUserHasReadLock |
|
| 3214 |
kErrLockFileIsFull |
|
| 3215 |
kErrDwgFileDoesNotExist |
ADE tried to unlock a file but the .DWK file was missing. Occurs if the .dwk file was erased after a file was attached. |
| 3216 |
kErrNotAnADELockFile |
ADE internal object is invalid. Call support. |
| 3217 |
kErrFileMayHaveBeenModified |
Existing .DWK file does not belong to ADE. the lock file exists and can be read by ADE, but ADE does not own the file. |
| 3218 |
kErrFileHasLocks |
ADE tried to remove a lock file but it was not found. Occurs if the .dwk file was erased after a file was attached. |
.